2000 F150 stock 4-pin towing diagram?
#1
NIGHT TRAIN
Thread Starter
2000 F150 stock 4-pin towing diagram?
i have a stock wired 4 pin connector from the dealer. the right turn signal/brakes (green wire) has no power.
does anyone have a wiring diagram or know how that plug is wired in?
thanks
does anyone have a wiring diagram or know how that plug is wired in?
thanks
#3
NIGHT TRAIN
Thread Starter
Have you checked your fuses? Attachment 430290
i did check fuse #23. everything works, but right turn signal and right brake light on the trailer.
parking lights work...
thanks for the diagram, have to look at it after a couple less beers, lol...
#4
Senior Member
i'm guessing you have the bare min tow package....look at the 4 pin plug for rot and breaking on the green wire...aftermarket kits are cheaper to replace with....curt/reese/hidden all make kits..
#5
NIGHT TRAIN
Thread Starter
i put a new 4 pin kit on the truck because the old one had become less than conductive and efficient.
the problem is the green wire and where it comes from.
does it actually tap into the right tail light or some where else on the truck. need to pull the taillight off and look but its raining today.
the problem is the green wire and where it comes from.
does it actually tap into the right tail light or some where else on the truck. need to pull the taillight off and look but its raining today.
#6
Senior Member
I think 12v pulsed or solid comes thru F19 in Battery Junction Box under hood. Trailer hookup fuses are separate from truck light fuses. Fuse 19 should have pulsed 12v (right turn/hazard) or solid (brake) otherwise should be 0v.
It does not tap into right tail light. Its separate all the way from turn signal switch thru fuse 19.
It does not tap into right tail light. Its separate all the way from turn signal switch thru fuse 19.
Last edited by raisin; 05-10-2016 at 06:49 PM.
The following users liked this post:
06HDF150 (05-10-2016)
#7
NIGHT TRAIN
Thread Starter
I think 12v pulsed or solid comes thru F19 in Battery Junction Box under hood. Trailer hookup fuses are separate from truck light fuses. Fuse 19 should have pulsed 12v (right turn/hazard) or solid (brake) otherwise should be 0v.
It does not tap into right tail light. Its separate all the way from turn signal switch thru fuse 19.
It does not tap into right tail light. Its separate all the way from turn signal switch thru fuse 19.
Trending Topics
#8
NIGHT TRAIN
Thread Starter
I think 12v pulsed or solid comes thru F19 in Battery Junction Box under hood. Trailer hookup fuses are separate from truck light fuses. Fuse 19 should have pulsed 12v (right turn/hazard) or solid (brake) otherwise should be 0v.
It does not tap into right tail light. Its separate all the way from turn signal switch thru fuse 19.
It does not tap into right tail light. Its separate all the way from turn signal switch thru fuse 19.
you da man !!!!!!!
fuse #19 under the hood blown....
thanks so much
#9
Senior Member
#10
NIGHT TRAIN
Thread Starter