Wolvee's Build
#11
Senior Member
Thread Starter
I picked this up today for the armrest but on the test pieces, it looks a little dark.
#12
Senior Member
Thread Starter
I Ordered 4 Bilstein 4600's for the truck tonight. I couldn't pass up the deal from 4wheel parts @ $251
http://www.4wheelparts.com/Lift-Kits...hockingBIL4600
http://www.4wheelparts.com/Lift-Kits...hockingBIL4600
#13
Senior Member
Thread Starter
I called 4wheel Parts and asked them about my order.
He adjusted it, so I can get the 5100's on the rear for only an additional $8.
Exactly what I needed. So, 4600's up front, 5100's in the back.
He adjusted it, so I can get the 5100's on the rear for only an additional $8.
Exactly what I needed. So, 4600's up front, 5100's in the back.
Last edited by Wolvee; 05-22-2015 at 01:13 PM.
#14
Senior Member
Thread Starter
Lower Ball Joints
Wiper Blades
Axle Seals
RP gear oil
Blinker Bulbs
Wiper Blades
Axle Seals
RP gear oil
Blinker Bulbs
#15
Senior Member
Thread Starter
The pile isn't supposed to be getting bigger, SOAB!
#16
Senior Member
Thread Starter
#17
Senior Member
Thread Starter
I got the front end put back together with the new shocks. I'm doing the rear axle seals and rear shocks in the morning.
Alignment and inspection attempt number 2 on Monday.
Alignment and inspection attempt number 2 on Monday.
#18
Senior Member
Thread Starter
It went in for an Alignment today but they say it didn't need it. After changing all of this stuff to include turning up the Torsion bars, this was the end result. I'm skeptical of its accuracy.
#19
Senior Member
Thread Starter
The Springs are Ordered. 4/1 #2200 springs from http://www.generalspringkc.com/product_p/43-1199hd.htm
Here's what I'm working with already.
3/1 Factory (Looks stock to me but I don't know much about all the options on these trucks.)
Ride Height as of right now.
Here's what I'm working with already.
3/1 Factory (Looks stock to me but I don't know much about all the options on these trucks.)
Ride Height as of right now.
#20
Senior Member
Thread Starter
These arrived today. :0)
The quality look as some of the lines I've put on other cars. I'm glad to see they have the rubber sheathing. The stainless lines are also coated with a clear plastic. If I were to venture a guess, I'd say they're going to end up yellowing over time. It wouldn't affect the stainless braid integrity but it might make it look dingy.
The quality look as some of the lines I've put on other cars. I'm glad to see they have the rubber sheathing. The stainless lines are also coated with a clear plastic. If I were to venture a guess, I'd say they're going to end up yellowing over time. It wouldn't affect the stainless braid integrity but it might make it look dingy.
Last edited by Wolvee; 06-12-2015 at 12:58 PM.