White Fang Build Thread (2012 FX4)
#162
Senior Member
The following 2 users liked this post by nfldfordman:
Black_Thunder (01-31-2015),
GeauxFord9 (04-23-2015)
#163
Project White Fang
Thread Starter
Picked up my Light bar today and the Nfab/Smittybilt mount! Also picked up the replacement led raptor style lights since my other ones screwed up.
Hopefully get it all on and done tomorrow!
Hopefully get it all on and done tomorrow!
Last edited by Black_Thunder; 01-31-2015 at 11:29 PM.
#164
Project White Fang
Thread Starter
Well the old ****ty LED "Raptor" lights have been taken off and the new ones are now on. Lets hope the second times a charm! Heres a few pics of the wiring on the new lights, although its the exact same. Just cut off the old LED's and attached the new ones to the old wires. 3M tape to stick them on, I will post some pictures of how they look in the dark later.
#165
Senior Member
Hope they're good for you
The following users liked this post:
Black_Thunder (02-01-2015)
#166
Project White Fang
Thread Starter
I also installed my 30" LED light bar today on the N-Fab/Smittybilt. The light bar was 2.5" longer than the last hole for the light bar mount. We had to cut some steel, grind it etc., drill 2 holes in it and paint it black to match the light bar mount. Screwed it all into place and worked out perfectly and you can't even tell. My phones about to die so I will post some pictures a little later of what I'm talking about, as well as some night shots of the bar!
#167
Project White Fang
Thread Starter
Sorry for the delay ended up going to wash it and its -30 out so had to take my time drying it in the car wash, almost 2 hours later and she's lookin sexxxy Now its going to be really hard to wait until spring to throw my rims on lol
Anyway so here is the wiring, tucked it up as neatly as possible, zipped tied everything and through the rubber grommet and into the cab for my switch. Didnt wire it into my highballs because I wanted to just do it this way for now, if it becomes annoying then I will do that. Also the pictures of the mount we had to add on so the bar actually fit..
Anyway so here is the wiring, tucked it up as neatly as possible, zipped tied everything and through the rubber grommet and into the cab for my switch. Didnt wire it into my highballs because I wanted to just do it this way for now, if it becomes annoying then I will do that. Also the pictures of the mount we had to add on so the bar actually fit..
#170
Maybe to many trucks?
Been slowly catching up with your build now that we recently got our 10 and I must say I really like how it is looking right now.
I hope the wheels you have look as good on your truck as some are thinking they will.
Trav
I hope the wheels you have look as good on your truck as some are thinking they will.
Trav
The following users liked this post:
Black_Thunder (02-01-2015)