Ford F150 Forum - Community of Ford Truck Fans

Ford F150 Forum - Community of Ford Truck Fans (http://www.f150forum.com/)
-   Members Builds (http://www.f150forum.com/f78/)
-   -   Stage3Motorsports.com Race Red FX4 Build (http://www.f150forum.com/f78/stage3motorsports-com-race-red-fx4-build-233668/)

Stage3Motorsports 11-07-2013 07:22 PM

Stage3Motorsports.com Race Red FX4 Build
 
Here is our newest project truck. We will be adding a couple different 5.0L cold air intakes, and edge tuner, and SCT tuner, and an SCT tuner with custom tunes for testing. We have 9 exhaust systems we will be doing sound clips on. We will update the page as the trucjk gets faster, louder and bigger.

Stock Info:


Race Red FX4 Crew Cab 5.5 Bed
5.0L
3.73 Gears


Stage3Motorsports 11-07-2013 07:52 PM

Just installed the Icon Stage 2 F150 4x4 3 inch lift kit. Here are some pics, we will post a more pics and install videos and how to's very soon. So far I really like the icon kit. Install was simple and the ride seems really nice.

Wheels are 18x9 XD Misfits

Tires are 275/70/18 general grabber red letters

http://www.f150ecoboost.net/forum/at...ock-kit-29.jpg

http://www.f150ecoboost.net/forum/at...ock-kit-21.jpg

http://www.f150ecoboost.net/forum/at...ock-kit-15.jpg

http://www.f150ecoboost.net/forum/at...ock-kit-04.jpg

http://www.f150ecoboost.net/forum/at...ock-kit-10.jpg

FracAttack13 11-07-2013 08:15 PM

Sweet!!! Those are my favorite color. Can't wait to see how the end result come out.

FracAttack13 11-07-2013 08:17 PM

I'm so jealous, I wish they had that color when I bought mine. Nice choice on the lift!!
Subscribed!!

JaredTanner 11-08-2013 12:36 AM

Awesome setup. Sub'd

Stage3Motorsports 11-08-2013 10:56 AM

Also installed the 3 inch rear block kit from Readylift.

http://www.stage3motorsports.com/ass...nstall%204.JPG

azmidget91 11-08-2013 11:00 AM

:thumbsup:

bdw132 11-08-2013 11:10 AM

sub'd

Stage3Motorsports 11-08-2013 07:56 PM

Here are some close ups of the Icon 4x4 coil overs we installed

http://www.f150ecoboost.net/forum/at...loverkit01.jpghttp://www.f150ecoboost.net/forum/at...loverkit02.jpghttp://www.f150ecoboost.net/forum/at...loverkit04.jpghttp://www.f150ecoboost.net/forum/at...loverkit05.jpghttp://www.f150ecoboost.net/forum/at...loverkit06.jpghttp://www.f150ecoboost.net/forum/at...loverkit07.jpghttp://www.f150ecoboost.net/forum/at...loverkit09.jpg

Stage3Motorsports 11-11-2013 04:29 PM

Pics and install guidde for our Icon 2.5 coil overs

First up: the coilovers. ICON's performance coilovers consist of a 2.5" aluminum shock body wrapped up in an Eibach Performance Coilover Spring that provides excellent levels of response and articulation while still giving your truck a great ride on the street. The coilovers are actually pretty easy to get installed, though space is kind of an issue and having an extra pair of hands ended up helping a great deal. Our first step was to head down to Extreme Performance down in Goodyear, to enlist the help of Kris, JD, and one of their lifts. Our truck was already up in the air thanks to our earlier install of ReadyLift's 3" Rear Lift Block, so JD and Kris went to work tearing at our truck's front suspension for the coilover installation.
The first real step of this install was one of the more tricky. Kris had to reach up on top of the shock mount and loosen all the nuts holding the factory shock assembly in place. Very little clearance and not a great view made it kind of difficult. It may hav been easier to go from above with a long extension, but our heavy truck was already close to maxing out their lift. After some feeling around, Kris got them all off and trudged onward.
Next, Kris removed the bolt for the lower shock mount to prepare for the removal of the entire shock and spring assembly.
Kris then removed the bolt holding the tie rod end to the steering knuckle and moved the whole tie rod assembly out of the way.
After the tie rod bolt, Kris hit the bolt holding the upper control arm ball joint to the spindle. Once the bolt was removed, it took some penetrating oil and some hammering with a mallet to pop the ball joint stud loose.
With the ball joint, tie rod, and strut mount free, Kris pulled the the wheel hub and rotor assembly out and down to give himself enough room to yank out the factory damper and spring.
With the factory assembly out of the truck, Kris and JD could now slide the ICON coilovers into place and get ready to bolt them into their mounts.


We did run into a slight issue with the fitment of ICON's top plate with our truck's strut mounts. Kris and JD, for the life of us, could not get the bolt holes lined up, and ICON's instructions were pretty adamant about the coilver's orientation. We gave ICON a call, and sure enough, all we had to due was rotate the coilovers 180 with the serial number facing the truck to get them to fit. Go figure.
With the upper bolts in place and hand-tightened, Kris and JD moved onto another fairly tricky part of the install that looks easy on paper. ICON's coilovers have a smaller lower mount than the stock shock and use a set of metal spacers to compensate. Seems simple, right? Well, you need to push the lower control arm and hub assembly into an effective position while holding the spacers in place while pushing ICON's grade 8 bolt through the whole lower ring, spacers, and mount. Needless to say, an extra pair of hands came in...handy.
After the lower bolt was secured, Kris torqued all the bolts back to their proper specs. We didn't reinstall the upper control arm ball joint or tie rod right away, because up next were our ICON Tubular Uniball Upper Control Arms, but you definitely should put those back nice and tight, assuming you want your truck to actually move where you want it.


All times are GMT -4. The time now is 10:48 AM.


Copyright 2006 - 20011 F150forum.com