The Silver Sleeper Build Thread
#24
Senior Member
Thread Starter
Well, bit the bullet and ordered a Full-Race FMIC today. Talked to Jeremy that's there. Takes about 3-4 weeks to get it done and shipped to me...so excited! Really looking forward to seeing how it complements the other mods I've done.
#26
Senior Member
Thread Starter
Well guys, last night I found some Rigid D2s buried in my closet, so I hooked them up.
I started with routing the wiring through the bumper and behind the headlight.
Gotta be strapped...
I then used this firewall hole and grommet to feed the wires through to the cab. I drilled a hole in the grommet just big enough to where you can barely get it around the wire. So you ensure a water tight fit.
Wires are all tucked and wrapped with electrical tape to look stock. I hate have red wires running everywhere. I sip tied and taped all exposed wire so nothing is flopping around.
Bright as EFF!
I hope yall like it!
I started with routing the wiring through the bumper and behind the headlight.
Gotta be strapped...
I then used this firewall hole and grommet to feed the wires through to the cab. I drilled a hole in the grommet just big enough to where you can barely get it around the wire. So you ensure a water tight fit.
Wires are all tucked and wrapped with electrical tape to look stock. I hate have red wires running everywhere. I sip tied and taped all exposed wire so nothing is flopping around.
Bright as EFF!
I hope yall like it!
#28
Senior Member
Thread Starter
Quick update for yall, ordered the Supreme LED kit from Jon_To. Pretty excited to get it, since the dome lights in these truck are horrible. Ill keep y'all posted once I get them installed!
#29