Well guys, last night I found some Rigid D2s buried in my closet, so I hooked them up.
I started with routing the wiring through the bumper and behind the headlight.
Gotta be strapped...
I then used this firewall hole and grommet to feed the wires through to the cab. I drilled a hole in the grommet just big enough to where you can barely get it around the wire. So you ensure a water tight fit.
Wires are all tucked and wrapped with electrical tape to look stock. I hate have red wires running everywhere. I sip tied and taped all exposed wire so nothing is flopping around.
Bright as EFF!
I hope yall like it!