SAWMAN556's 07 XLT 4x4 build thread
#11
Senior Member
Thread Starter
My Magnaflow 16616 came in and I got it installed. It was a pretty simple install except for getting the old exhaust off. It looks cool and sounds great. Better pics to come.
#12
Senior Member
Thread Starter
My Bilstein F4-BE5-B317-T0/F4-BE5-B316-T1's finally came in. I got the rears installed, didn't even have to take the wheels off. My buddy is doing the fronts on Wednesday at his shop. Bye bye front spacers. On Friday I have an appointment for a front end alignment then I'm done for a while. I'll detail it and put up some good pics.
Last edited by SAWMAN556; 10-18-2011 at 04:05 AM.
#13
"Lifted"
iTrader: (2)
Nice build... I was looking at doing the Motorcraft E-fans off of a 2010 F150. What size fans are those? I really hate those probes that stick in the radiator.. Wish they had a better setup.. I will be going with the UD pulleys as well.. Look forward to the rest of your results...
#14
Senior Member
Thread Starter
Nice build... I was looking at doing the Motorcraft E-fans off of a 2010 F150. What size fans are those? I really hate those probes that stick in the radiator.. Wish they had a better setup.. I will be going with the UD pulleys as well.. Look forward to the rest of your results...
My fans are 16". Blown Ford did the 2010 F-150 fans which you can read about in that thread. He also used a different controller set-up then my DC set-up.
I found that Derale made different probes.
In my truck:
I've cleaned up the wiring since this photo:
#15
Sweet stuff so far! May I ask how much the "e-fans" help? Also, that tire "in the bed" thing is flipping sweet! How much did it cost(?), and can you take the rod out or flip it over (like a goose neck)? Very cool, need one in mine.
#16
Senior Member
Thread Starter
http://www.troyerperformance.com/cgi...no=PPI-EFK1604
http://www.troyerperformance.com/cgi...talogno=527374
The Tiregate bed mount was $170.00 after shipping. The rod comes out so you can still use your bed. The extra tire and wheel will set you back a few more bucks.
#17
The e-fans were $429 but I probably have another $100 in it with the Flex-a-lite tube and upgraded probes. I also did the under-pulley.
http://www.troyerperformance.com/cgi...no=PPI-EFK1604
http://www.troyerperformance.com/cgi...talogno=527374
The Tiregate bed mount was $170.00 after shipping. The rod comes out so you can still use your bed. The extra tire and wheel will set you back a few more bucks.
http://www.troyerperformance.com/cgi...no=PPI-EFK1604
http://www.troyerperformance.com/cgi...talogno=527374
The Tiregate bed mount was $170.00 after shipping. The rod comes out so you can still use your bed. The extra tire and wheel will set you back a few more bucks.
#18
Senior Member
Thread Starter
#20
Senior Member
Thread Starter