Sir_Ambrose

Hey, man, if it's no trouble to you, what are the measurements for that box? I've been wanting to do one for my truck, just can't ever figure out exact dimensions. I've test fitted and test fitted, and I don't know. I may be having a brain fart about it...continuously. Also, I recommend taking your jack out of it's little hidden pocket. Really annoying to get to, as the screws that hold it in are on the passenger side under that seat, and it slides out under the driver's side back seat. Take it out and put it in your new box!

Berg_LY

thanks eastyorkbmx. just curious, do you ride bmx?

Sir Ambrose, not a problem, will try and post measurements later today. The hardest part is creating the top arc. Just do that with a compass on cardboard, cut it out then transfer it to the side panels.

Great advice on the jack. I figured it was in there somewhere but haven't had to use it yet. Will look at extracting that as well.

Berg_LY

Here are the dimensions I used for creating the bin

Sir_Ambrose

Awesome. Thanks man!

Berg_LY

Santa showed up and line-x'ed the bed. Cool dude.







had to make sure the 4wd and bedliner were good to go





yep, everything checked out!

Berg_LY

Been a little while, hope everyone has recovered from the holidays and having an awesome new year! Got a couple of little things for Christmas, one was a tail gate assist. Really cool, pretty straight forward and quick install. Took about 15 minutes.




non-intimidating small package





easy instructions





just a couple of tools needed





low profile, works awesome

Berg_LY

Truck is getting wrapped, here is a WIP, should be done tomorrow. Pretty stoked on how its coming along!

nfldfordman

Subd, nice truck

Berg_LY

Thanks, nfldfordman. I'm excited to see how the wrap comes out. Should be a real attention getter.

Sir_Ambrose

I used your measurements, just added a look little length to fit under the entire seat. Your measurments really helped, man. I appreciate it.