BrowningSCrew

I like the Sealed beam housing better than the bars

smcox1

Well they are way cheaper lol!!! And they look bad *** when on especially the low beam. Looks like it will be another nice one off build like the tails!! I think I might give it a try. I'm also getting 7" round led headlights for the camaro. Oh and I also found out I can take the header panel, bumper and lower valance off the 77 and bolt the 70-73 nose on woo-hoo!! I guess the fenders are the same so I can just switch the nose.

BrowningSCrew

You could also look into the square D2S projector, it would fit the headlight and look mean as well. That's what I'll be doing on my dad's 07 style superduty lights.

smcox1

I also thought about using those. If I did projectors that's what I would use no need to put a circle in a square.

smcox1

Ordered some headlight parts!

smcox1

I'm also thinking about doing a glass roof in the Camaro. Well with lexan not glass.

smcox1

One piece to the puzzle is here just need the other parts so I can open up the headlights and start the install.

When only the low beam is on they look awesome!

smcox1

Going to pick this up Sunday it's a deal I can't turn down.

I'm turning it into this And this paint scheme is if I leave it with a 4' tack.

Plans are to strip the aluminum down and polish it up like a mirror.
And if I take the 4' tack out this is going in it, 14' of LQ's

Will look like this on a smaller scale and with black cabinets

CCR90

How much work is it to build the slide out?

Flare side crazy

where do you pick up the diamond plate steel flat stock at?