Krookz build
#111
Senior Member
Thread Starter
#114
Senior Member
Thread Starter
FML!
Was under the truck making these little abs sensor guards... apparently the sensor snaps off at the plastic and its a few hundred to fix. And its on the front side of the axle... brilliant design. And I see my damn Icon shock shafts are rusted. I lightly knocked off the surface rust with a 3m scuffy pad and coated them w/ some oil. Im headed to Windrock next week so shipping them now isnt an option. This crap is ridiculous... I want an old truck, old parts, less rusty disposable electronic cluster f's.
Front shafts look fine.
1118151820a by ruggedT Decals, on Flickr
1118151820 by ruggedT Decals, on Flickr
Guards-
1118151832 by ruggedT Decals, on Flickr
Was under the truck making these little abs sensor guards... apparently the sensor snaps off at the plastic and its a few hundred to fix. And its on the front side of the axle... brilliant design. And I see my damn Icon shock shafts are rusted. I lightly knocked off the surface rust with a 3m scuffy pad and coated them w/ some oil. Im headed to Windrock next week so shipping them now isnt an option. This crap is ridiculous... I want an old truck, old parts, less rusty disposable electronic cluster f's.
Front shafts look fine.
1118151820a by ruggedT Decals, on Flickr
1118151820 by ruggedT Decals, on Flickr
Guards-
1118151832 by ruggedT Decals, on Flickr
#115
Good looking truck. I thought I read somewhere that you were only 2" on 34s but now you lowered? That sucks about the rust, I take it you didn't get icons special coating, also are you running they're low speed valving or regular?
#116
Senior Member
Thread Starter
Yes i lowered it from 2, its much better now... No bump, really nice ride. Icons "coating" is only on the alum body, not the shafts. They are standard valving
#117
Senior Member
Thread Starter
My brothers and I ventured out to Windrock over Thanksgiving break. Got to the trails and this happened.... #fordproblems
IMG_7059 by ruggedT Decals, on Flickr
Just kidding! Dual batt solenoid was stuck or something. Was making a ton of racket.
Truck did great. Sliders worked and skids worked... the subframe needs a modification on the transfer case one, I left the ends unsupported for some reason and it bent up. Yota is my brothers - has all of my Tacoma's old parts. We stuck to the blue trails. The one black we tried had ruts on the uphill that you'd need 40's to clear without riding on axle/skids the whole way up.
And these trail grapplers.... awesome!
IMG_2584 by ruggedT Decals, on Flickr
IMG_7026 by ruggedT Decals, on Flickr
IMG_7002 by ruggedT Decals, on Flickr
IMG_6996 by ruggedT Decals, on Flickr
IMG_2573 by ruggedT Decals, on Flickr
IMG_2575 by ruggedT Decals, on Flickr
IMG_2570 by ruggedT Decals, on Flickr
IMG_7120 by ruggedT Decals, on Flickr
IMG_7161 by ruggedT Decals, on Flickr
IMG_7059 by ruggedT Decals, on Flickr
Just kidding! Dual batt solenoid was stuck or something. Was making a ton of racket.
Truck did great. Sliders worked and skids worked... the subframe needs a modification on the transfer case one, I left the ends unsupported for some reason and it bent up. Yota is my brothers - has all of my Tacoma's old parts. We stuck to the blue trails. The one black we tried had ruts on the uphill that you'd need 40's to clear without riding on axle/skids the whole way up.
And these trail grapplers.... awesome!
IMG_2584 by ruggedT Decals, on Flickr
IMG_7026 by ruggedT Decals, on Flickr
IMG_7002 by ruggedT Decals, on Flickr
IMG_6996 by ruggedT Decals, on Flickr
IMG_2573 by ruggedT Decals, on Flickr
IMG_2575 by ruggedT Decals, on Flickr
IMG_2570 by ruggedT Decals, on Flickr
IMG_7120 by ruggedT Decals, on Flickr
IMG_7161 by ruggedT Decals, on Flickr
The following users liked this post:
safetypin (12-14-2015)
#118
Senior Member
Thread Starter
IMG_7176 by ruggedT Decals, on Flickr
IMG_7142 by ruggedT Decals, on Flickr
IMG_7191 by ruggedT Decals, on Flickr
IMG_7198 by ruggedT Decals, on Flickr
IMG_7206 by ruggedT Decals, on Flickr
IMG_2582 by ruggedT Decals, on Flickr
IMG_7142 by ruggedT Decals, on Flickr
IMG_7191 by ruggedT Decals, on Flickr
IMG_7198 by ruggedT Decals, on Flickr
IMG_7206 by ruggedT Decals, on Flickr
IMG_2582 by ruggedT Decals, on Flickr
The following users liked this post:
safetypin (12-14-2015)
#119
Very nice man! I finally ordered my 35 12.50's so hopefully my truck will be ready for some trails soon. Can't do much like what you are doing here though. Need something much less rocky lol. Looks like fun though!
The following users liked this post:
Krookz (12-01-2015)