hallenfe

I just ordered the leveling kit and readylift rear blocks. I also bought some Camburg UCAs from a guy on here for pretty cheap. I will see if i got time to put those on this weekend.

hallenfe

Parts have arrived might get to them on tomorrow.

hallenfe

Need some ideas on what mods to do next. Trying to keep it under $500

hallenfe

New toys came in today

1994Vmax

Hp tuners and tune it yourself. I got to dissect a custom SCT tune I bought from a reputable tuner with my HP... needless too say... nothing custom about it and it's much less than what I am going to do. I tune with efi live on gm already and it's really not that hard. Even as the tuning hack I consider myself to be I can do a better job. I won't even use it as a base tune... i am just going to build my own from scratch off Fords stock tune. My next mod personally is long tubes and a cat less Y pipe.

Is that exhaust 3" or 3.5"?

nfldfordman

nice!!

hallenfe

I'm pretty sure it's a 3" exhaust. Waiting on another piece to come before I can install it.

1994Vmax

It at least is a complete kit from the flange forward of the resonator I hope then. The big bottleneck on these is that silly 2.5" resonator piping as you likely know. At least the factory Y pipe is 3.5" on these trucks. MBRP was the only manufacturer I found that listed a full 3.5" system for them. I'm thinking stainless works will be my choice for headers. If they fit good I will order a second set for my other truck lol.

jedeckert1984

I deleted my resonator and run a 3in Afe Exhaust.

40mm

Very nice!! I think you need to show off that powerplant. I modified mine from a raptor badge. Had to chop off the letter "L" part and paint it to match. The script size is the exact same as the F150 badge.