Glowing Black FX4 Build
#31
Upcoming projects:
Ordered these for the bumper. They'll mount right to the NFAB RearRunner and be additional backup lights
Ordered this grill to replace the billet
As well I ordered the Amber Rigid Duallys. Plan is to mount them behind the mesh grill, right next to where the signal lights are. Since I have the V3s, my running lights are white but I have DRL disabled. Basically, plan is to run the Duallys as markers during the day for that cool amber look, and then flip them off when the autohealights kick the V3s and the retros on.
Excuse the poor photoshop but this is what I'm aiming for:
Ordered these for the bumper. They'll mount right to the NFAB RearRunner and be additional backup lights
Ordered this grill to replace the billet
As well I ordered the Amber Rigid Duallys. Plan is to mount them behind the mesh grill, right next to where the signal lights are. Since I have the V3s, my running lights are white but I have DRL disabled. Basically, plan is to run the Duallys as markers during the day for that cool amber look, and then flip them off when the autohealights kick the V3s and the retros on.
Excuse the poor photoshop but this is what I'm aiming for:
#32
Senior Member
Thread Starter
#33
Senior Member
Thread Starter
Started on my switches today. So far, I have just used a small flush mount rocker switch in the console to activate everything. New ones are Contura V switches from OTRATTW, mounted where the dash pocket/trailer brake controller goes.
I think it's gonna look awesome.
I think it's gonna look awesome.
#40
Senior Member
Thread Starter
I wired up a small 9005-deutche pigtail.
Attachment 571975
Found a little motivation today and did my switch wiring. Now to just put it all back together, except it's minus 30 outside :/
Attachment 571975
Found a little motivation today and did my switch wiring. Now to just put it all back together, except it's minus 30 outside :/
Last edited by Reatki; 02-06-2014 at 01:57 PM.