Dylans FX4 Small build
#1
Senior Member
Thread Starter
Dylans FX4 Small build
Hey everyone this is my second build thread first was a 2013 STX Reg cab
I now have a 2013 FX4 Screw with a 6.5 ft bed so pretty big upgrade , I've had the truck since July and have doen a few things already and have a few more
Mods so far:
weatherguard box ( from last truck)
raptor grille lights
bed linered the side steps ( no more slipping when wet)
Boss Coilovers set at 2.75 with 3in blocks in rear
Icon rear shocks
Icon UCAs
Toyo AT2s 285/75/18 on stock 18s at first
Fuel Boost 18x9s 0mm offset
Rigid dot fogs and hyperspots up front in the bumper hole
Morimoto XB led fogs in factory spot
swicth panel in dash under headlight switch
Future Upgrades
BDS 6in lift (Going on thursday!)
PTM Fender Flares (maybe)
Bumper?
Heres the truck day one with just my tool box
I now have a 2013 FX4 Screw with a 6.5 ft bed so pretty big upgrade , I've had the truck since July and have doen a few things already and have a few more
Mods so far:
weatherguard box ( from last truck)
raptor grille lights
bed linered the side steps ( no more slipping when wet)
Boss Coilovers set at 2.75 with 3in blocks in rear
Icon rear shocks
Icon UCAs
Toyo AT2s 285/75/18 on stock 18s at first
Fuel Boost 18x9s 0mm offset
Rigid dot fogs and hyperspots up front in the bumper hole
Morimoto XB led fogs in factory spot
swicth panel in dash under headlight switch
Future Upgrades
BDS 6in lift (Going on thursday!)
PTM Fender Flares (maybe)
Bumper?
Heres the truck day one with just my tool box
Last edited by DylanCulbreth; 02-15-2017 at 04:38 PM.
#5
Senior Member
Thread Starter
So as i said already bought a BDS 6" lift which is being installed tomorow very excited will take some before pics later and after tomorow. Night after the lift ill decide on the fender flares my first choice would be bushwaker but opinions on weather to leave them black or paint them ingot silver? Anyone?