DHGs Build
#23
DHG FX4 SCab
Thread Starter
Saw another set of Welds on craigslist.. a set of 18x10 Weld Velocities finished in chrome. Since chrome Weld wheels never made it to the east coast.. i knew I had to have them. They came off of an SCrew show truck from Cali that a local off road shop/dealer picked up at an auction. Apparently at one point the SCrew was a show truck on the west coast. Threw some used 36x15.50 Mickey Thompson ATZs on it, and called it a day.
#24
DHG FX4 SCab
Thread Starter
Ive been neglecting mine for that past year or so since it never gets driven anymore. Decided to show it some love, and get it ready for my OBX trip this month. So, this past month ive fixed/done : an oil change (finally,) clay bared (finally,) and waxed it, replaced the dash cup holders with one from an Expedition (ash tray/change holder,) replaced my OHC with one from an Expedition, mine was burnt up, rotated the tires, tightened up my steering stabalizers (hardly hand tight,) replaced the door panel lights (both burnt out, still trying to figure out why no interior lights come on only when pass. Door is opened,) replaced idler arm (pitman next,) fixed my passenger side door speakers (bad ground,) got rid of my bi-xenon HIDs (8k.. cant see **** on country back roads, replaced with Silverstar ZXE,) used Rust-Oleum crack sealant where lower door seams are (rust bubbles starting to form, should prevent any water or moisture from getting into the seams,) replaced lower shock bushings(broke one of the ears off the LCA. ****.) Sprayed entire chassis down with Purple Power and power washed it. I completely undercoated the chassis. I tried Dupli-Color truck bed armor. We shall see how well it holds up. (I used paintable rubberized under coating but the coin power washer blew that stuff right off) Still need to do another coat, but i lost day light so thats tomorrows project, plus a complete detail. I still want to convert the interior to LEDs and service the transmission
Replacing my OHC. You can see the left one has a burnt spot on the disply
Nifty dual compartment cup holder out of a 97 Expedition
After thoroughly cleaning the interior and clay bared the paint
My others
Replacing my OHC. You can see the left one has a burnt spot on the disply
Nifty dual compartment cup holder out of a 97 Expedition
After thoroughly cleaning the interior and clay bared the paint
My others