buster096 build thread
#302
Senior Member
Thread Starter
They did look nice, but they are basically nice, really expensive, paper weights lol. I'm anxious to get these things back to readylift and get my money back ASAP. Their customer service is a little lacking so doubtful I will get new rims from them. I don't even know how this return is going to happen because I didn't buy directly through them. Also I'm admitting fault to the damage to the rims, I checked for clearence in the air but not on the ground, stupid mistake. The second I get my money back though, it's going straight to dirt freeks to have them make me a set out of tig welded DOM tubing. I'm going to clear them too so it should look pretty sick.
#303
SkallyWag
I wouldnt mind getting some and some new ucas built by dirt freeks. Good dudes. Do you still have those duallys mounted up on the hood.
#305
SkallyWag
Ya man i do. They have 1.5 inch unis though so i can never run anything less than an 18 with 4.5 inch bs.
#306
Senior Member
Thread Starter
Oh wow that's crazy. Raptors run 17" wheels all the time and their Uca's fit. I wonder what's different about their f150 arms. Do want to change them out to run 17's?
#307
SkallyWag
Might. I may plus dirt freeks has some bad a ucas. Ya these are the 1.5" not the 1" uni ***** so apparently they dont allow for 17s or stock wheels.
#308
Senior Member
Thread Starter
Idno if I would drop that kind of money tho just to run a smaller wheel. It must be how they have their misalignment spacers set up cause camburg has 1.25" uni's and you can run a 17" wheel. Dirt freeks Uca's do look pretty badass tho. I've been eyeing their prerunner kit and am waiting to see a 4wd version completed. If it can use an oem replacement coilover I'm bolting that kit up to my lift to have lifted mid travel which would be pretty cool. I'm talking with Adrian right now to get the measurements right for my heim tie rods so probably when we figure it all out they can offer it as an off the shelf kind of product instead of full custom.
#309
SkallyWag
Yeah hes a good guy. Ive talked with him a few tines in the past.