sleipnir

Well thought I would build some traction here since I have some on EB.NET. Since selling my old Tacoma I am starting a build thread for my Furd. It's a 2012 Furd F150 SCREW Lariat 3.5L Ecoboost. I bought it with about 94,000 miles on it and it had a leveling kit and 305/55/20 K02's.

It originally went up to Tifosi Performance around October to get GT turbos, CRP ported manifolds, CPE Intercooler, Tubrosmart BOV, Full Race Catted DPs and an Intake. I added all this stuff because it was either needing replacement or going out and needed to be replaced soon anyway. Truck was running amazing until the rings let go around 120k miles in February because of carbon build up. Thanks GDI....

So now it's in the process of having a brand new built block with ported heads and EFR Turbos put on from RMB Motorworks.

Current mods are as followed:

Exterior:
BFG K02's 305/55/20
Custom Retrofit Headlights
Stubby Antenna
DIY Bedliner
Moriomoto XB LED Fogs

Interior:
LED Interior Lighting
Proclip Phone Mount

Motor:
RMB Motorworks Stage 2 Short Block
• Cylinder Block - Brand new Ford OEM bare block with a 92.50mm Stock Bore (Closed Deck)
• Pistons - RMB-JE 92.75mm FSR Forged Pistons, Custom Ringset, .210" Steel Pins, Clips, (Coated Skirts and Offset Wrist Pins)
• RMB Spec Gold Ceramic Piston Coating
• Connecting Rods - Callies Compstar H-Beams with ARP 2000 Rod Bolts
• ARP 2000 Headstuds
• Rod / Main Bearings - King XP Bearings
• Crankshaft - New Ford Gen2 Raptor Forged 2017+ Crankshaft
• Main Bolts - Standard OEM 6 Bolt Mains
• Compression Ratio: 10.0:1 STD Compression Ratio with STD .040" thickness head gasket
Pocket Port-R Heads with conical spring kit, with Ti Retainers and locks and custom valves.
XDI-35 HPFP
Spec C Cam Lobe to increase HPFP by 25%
Full Race- RMB EFR Twin Turbo Kit: • BRMS Crimped Racing hose upgraded
• PTP Turbine Blankets
• Charge pipes
• Hot Pipes
• EFR Manifolds
• Turbine Blankets • EFR 71/63 T25 single scroll turbins with T25 in and 3" outlet to a true 3+ pipe
• Black ceramic coated compressor housings
• Black ceramic coat turbine housing upgrade for the forged case center section made form aluminum
• Upgraded forged aluminum light weight turbo center-section
Turbo Smart IWG-75 Waste Gates with 14LB Springs (B1 Single Scroll Housing (Double 7lb spring))
Full Race V2 Intercooler
Full Race V2 Radiator
Radium Dual Catch Can
Custom Blue Painted Valve Covers

Trans:
CircleD 2B 258mm Billet Converter

Exhaust:
Full Race exhaust with resi

Suspension:
Rancho XL9000 Rear Shocks
Fox 2.0 Coilovers
Moog Upgraded Sway Bar Endlinks and Bushings

Plans:

Suspension:
Front:
Raptor LCA, Axle, Sway Bar
Aftermarket UCA, outer tie rod
King 3.0 Shock

Rear:
King 3.0 Shock
Deaver Leaf Springs
Bumpstop kit with King Bumps

^^^More details to follow^^^

Trans:
Upgraded Torque Converter
Billet Input Shaft
Stage 2 Shift Kit
Upgraded Clutches

Exterior:

Fiberwerx front fenders
Fiberwerx bedsides
Raptor rear end with axles
RPG Rocksliders
RPG Raceline front and rear bumpers

Interior:
Upgraded audio
Lowrance HDS-7
Icom Chase Package

sleipnir

AricsFX

iTrader: (3)

Welcome!

Tacoaric from TW

sleipnir

Hey hey! Always good to see another TW member in other places I have this build thread on there too with the same name in the other builds section

sleipnir

sleipnir

Well we almost have a complete engine at this point. Just waiting on valve covers and turbos to be put on. I did get my compressor housing recoated for free and they look amazing!

sleipnir

First picture is of the old housing and what the new one looks like along with what the 7163 wheels look like.

sleipnir

Motor is just about complete. Just waiting for the turbos to me mounted. RMB Motorworks has well exceeded my expectations and cant wait for this beast to get back!

AricsFX

iTrader: (3)

That is sexual!

sleipnir

Updated my first post to show the current upgrade plans

Motor is on it's way and should be here by Friday!