You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
instead of having 19 different threads for each mod i do....i figure its best to have one....so others can refer to something i do with more ease...anyways here it goes...
__________________
05 STX SuperCab 4.6L 4x4My truck build up link Lightly modded 271.5/336.9 (sct)
Last edited by blackbetty; 09-07-2009 at 05:54 PM.
so i went out and did the bambi mod, wow is the light a big difference, and then i did the free intake mod, hacked up the housing and noticed a good difference between old and new...
sorry for the darkness, the flash wasnt working due to a low battery
__________________
05 STX SuperCab 4.6L 4x4My truck build up link Lightly modded 271.5/336.9 (sct)
using a drummel take a cut off wheel, and cut a U shape from above the pegs that hold it in about a inch away from the clamp, then leave a small section on the bottom for the peg supports...thats it, its a air box mod.
__________________
05 STX SuperCab 4.6L 4x4My truck build up link Lightly modded 271.5/336.9 (sct)
In the kick panel on the passenger side, locate the center top relay, i think its 202 but i am prob. wrong. its the one with that jumper wire coming out
Get a female blade connector, crimp it to a piece of 18g wire and bend back the male blade at the top right if you looking at it above...
Take some of the plastic out of the fuse box around the relay to make room for the female clip.
ty there are a few things that i am going to try and finish tomorrow, banged out a oil change and stuff today...painted a few things, i got this idea from the famed Paul Byrd (sorry if i missed the last name's spelling) and his cobra, sick build btw if you get the chance catch it on corral.net, but anyways i figure its better to do this...so people can check it and go oo cool
__________________
05 STX SuperCab 4.6L 4x4My truck build up link Lightly modded 271.5/336.9 (sct)
well i got my kit today, i started painting it, for theme and for corrosion prevention as i live in socal now but i will be moving back to boston eventually, and i think its best to protect things anyways....
its a 3 inch single in to 2.25 dual out cat back with a turbo muffler, its not a bad kit, im painting tonight and if i can, then i will be tossing it on tomorrow....depends on if i can get a lift or not, i hate working on my back..
anyways heres a few pics to hold you guys over until tomorrow...
__________________
05 STX SuperCab 4.6L 4x4My truck build up link Lightly modded 271.5/336.9 (sct)
and painted to rust proof it, not for looks as much....i didnt take my time nor did i care if i ran the paint....
i used one can for my old exhaust .... muff back, and the 3 pieces i did...bout to run out and grab more for the rest of the pipes....
i used this paint for those wondering...got it from the zone
__________________
05 STX SuperCab 4.6L 4x4My truck build up link Lightly modded 271.5/336.9 (sct)
blackbetty's mod build **updated sept 09**
as i live in socal now but i will be moving back to boston eventually, and i think its best to protect things anyways....
Linear Mode
