B4manek

Last weekend I picked up this 2000 Ford F250 Lariat. It's a nice truck but it needs some work.








As you can see it's a pretty clean truck other than this one annoying spot of rust. I ordered a replacement cab corner and I plan on installing it in a week or so.



There is also a list of other things that I plan to do to it.
1. Cab corner repair
2. Bedline rocker panels
3. Running boards
4. Seat covers
5. New mirrors (One is broken. Might replace with newer style ones)
6. Tonneau cover (current one is worn out)
7. Figure out what's wrong with temp/compass overhead pod thing.

B4manek

Cab corner came in and I picked up some bedliner for the rockers.

B4manek

Well it looks like I'll be replacing the cab corner on Saturday.

Anybody know how to remove this?

overboardford

usually there are "Y" prongs in probably 3 spots that hold that overhead console in

smcox1

I wouldn't bed line the rockers I would just remove those black strips off of the side. And if you replace the mirrors you should go with the 08+ style they are so much better then those old ones. Also a Harley Davidson front end ptm would look sharp!

B4manek

The bedliner wasnt my first choice but it covers up the repair so I dont have to match the paint and it covers the chips and scratches.

B4manek

It lookes like there are a couple clips way inside the cubby. I'll try again sometime.

B4manek

Well the plan was to do the repair today but the supplies didn't come in so it'll have to wait until next Saturday.

B4manek

Took the body moldings off and did some other small things.

B4manek