93 F150 Farm Truck
#1
Moochine Deats
Thread Starter
93 F150 Farm Truck
I bought myself a 93 f150 off a farm a few days ago. its pretty beat but it was 800 bucks and I couldnt pass it up. Its a 4.9l straight 6 with a 5 speed manual tranny. 4wd and it works great.
Brining it home.
Second day home started to see what needs replaced.
Third Day I started stripping it down and getting it ready for the new parts.
Found a new bed for 100 bucks
Built some cab mounts in shop class. very front driver side is rotted off.
Yeah i know about the hole in the weld lol. the kid who turned the tanks on had the gas at like 15psi instead of like 20-25.
Also I got the front end parts in today from napa.
-F250 coils
-Wheel Bearings
-Tierods
I found all the shock laying around in the garage so Im good there.
Ordering brakes and rotors tomorrow.
Has anyone heard of a rear disc brake conversion or rear axle with disc swap in these trucks? I did a ford 8.8 in my ranger and I like the rear disc brakes alot.
Brining it home.
Second day home started to see what needs replaced.
Third Day I started stripping it down and getting it ready for the new parts.
Found a new bed for 100 bucks
Built some cab mounts in shop class. very front driver side is rotted off.
Yeah i know about the hole in the weld lol. the kid who turned the tanks on had the gas at like 15psi instead of like 20-25.
Also I got the front end parts in today from napa.
-F250 coils
-Wheel Bearings
-Tierods
I found all the shock laying around in the garage so Im good there.
Ordering brakes and rotors tomorrow.
Has anyone heard of a rear disc brake conversion or rear axle with disc swap in these trucks? I did a ford 8.8 in my ranger and I like the rear disc brakes alot.
#2
Moochine Deats
Thread Starter
Got the front end tore down some today.
New coils.
[IMG][/IMG]
Decidied to start fixing the rear part of the frame.
[IMG][/IMG]
One Side done. I know that weld looks like dog S**T!
All fixed up and the weld got progressively better lol.
[IMG][/IMG]
Im also going to make one of these next week in shop class.
New coils.
[IMG][/IMG]
Decidied to start fixing the rear part of the frame.
[IMG][/IMG]
One Side done. I know that weld looks like dog S**T!
All fixed up and the weld got progressively better lol.
[IMG][/IMG]
Im also going to make one of these next week in shop class.
#3
Moochine Deats
Thread Starter
Ordered rotors and brakes today. Should have them by the end of the day. Going to put shocks on the rear when I get home and start putting the gas tank back in. And pull the radius arms off and change the bushings
#4
Moochine Deats
Thread Starter
New rotors are on! Wheel bearing pressed in!
So close to being finished.
Fixed the holes in the tail gate and patched some rust at the bottom. Not to worried about how it looks but it's better than holes.
So close to being finished.
Fixed the holes in the tail gate and patched some rust at the bottom. Not to worried about how it looks but it's better than holes.
#5
Senior Member
Right on, this is a nice fun one it looks like. I wish I had the ability to just do things and not worry about them being 100% to my liking. This would be a fun project.
Can't wait to see more.
Can't wait to see more.
#6
Moochine Deats
Thread Starter
Heres what I did today in school. made a custom hurst style shift **** for my truck. Wasnt really sure what I was doing at first but its starting be look pretty sweet.
Also I picked up the bed today. looks alot better than the old one
Also I picked up the bed today. looks alot better than the old one
#7
Moochine Deats
Thread Starter
Well I keep forgetting to take pictures of things lol.
Here is the bed I went and got. Really only cost me 50 bucks.
Got everything in the front end replaced. My bro gave me the shocks off his F250 cause he got new opes for free.
Rear Shocks are ready to go!!
Had to buy a new shackle and crap the old one I found out was cracked.
Pretty pumped to get her on the road!
Here is the bed I went and got. Really only cost me 50 bucks.
Got everything in the front end replaced. My bro gave me the shocks off his F250 cause he got new opes for free.
Rear Shocks are ready to go!!
Had to buy a new shackle and crap the old one I found out was cracked.
Pretty pumped to get her on the road!
Trending Topics
#8
This is awesome. Can't wait to see it finished.
#9
Moochine Deats
Thread Starter
Shes in one piece now! still need to wire the taillights and fix the tailgate but it can wait. wont have plates till later this week.
Im probably going to paint it around Christmas time. Until then ill keep updated with the little $#!%
Im probably going to paint it around Christmas time. Until then ill keep updated with the little $#!%
The following users liked this post:
Jfort (09-10-2016)
#10
Moochine Deats
Thread Starter
Well the furnace broke in school today so I cant melt the aluminum for the shifter just yet. Probably gonna be a week or so.
Well I got my brake lights in and all working.
Also got my new speakers put in.
While I was at it I pulled the old radio.
And got the new one put in.
Also I am getting a new front bumper in the near future. Its not chrome but Im just gonna paint it black or truck bed line when I paint everything else.
Well I got my brake lights in and all working.
Also got my new speakers put in.
While I was at it I pulled the old radio.
And got the new one put in.
Also I am getting a new front bumper in the near future. Its not chrome but Im just gonna paint it black or truck bed line when I paint everything else.