2014 Platinum EB slow build
#31
Lift,lower,stock,wrecked
Thread Starter
Thanks for the compliments.
From what I understand the Zone lifts are the same lifts with the exception being the strut spacers. I have very very little down travel now as it sits, the Zone spacers and level tack welded together. I was planning on ordering custom length coilovers to replace the current setup and keep the height. Which is still an option with a different height but not as cost friendly.
I emailed Zone trying to gather options and ideas, and I asked about the difference in the lifts and how tall the spacer is for the 4" lift. The spacer for my 6" lift is 5" tall. So in my mind if the spacer for the 4" lift is 3" tall then I could achieve a 4" lift with 0-3" coilovers and have no spacers.
From what I understand the Zone lifts are the same lifts with the exception being the strut spacers. I have very very little down travel now as it sits, the Zone spacers and level tack welded together. I was planning on ordering custom length coilovers to replace the current setup and keep the height. Which is still an option with a different height but not as cost friendly.
I emailed Zone trying to gather options and ideas, and I asked about the difference in the lifts and how tall the spacer is for the 4" lift. The spacer for my 6" lift is 5" tall. So in my mind if the spacer for the 4" lift is 3" tall then I could achieve a 4" lift with 0-3" coilovers and have no spacers.
Last edited by texasbred; 05-17-2015 at 10:16 PM.
#33
Lift,lower,stock,wrecked
Thread Starter
What you are saying makes sense. I guess it's going to depend on what Zone says. If the spacer for the 4" lift is only 3" tall then the c/o's should work. If not then I'll just order the new spacers and plan on custom length c/o's.
#34
Lift,lower,stock,wrecked
Thread Starter
Been struggling with wheel decisions all day. I have been thinking about 20x9 Fuel Full Throttle black/milled +01. Can't decide if I want to stick with chrome or go with a black wheel.
#35
Lift,lower,stock,wrecked
Thread Starter
Wheels and a new 3" block have been ordered. Removing the leveling kit and 5" block. Keeping the 6" lift up front and keeping the add-a-leaf. Going with 20x10 -12 this time. 20x12s will be for sale soon.
#36
Lift,lower,stock,wrecked
Thread Starter
New wheels, removed Undercover Flex & Bedrug. Removed leveling kit & 5" rear block. Installed 3" rear block and kept the add a leaf.
IMG_5051 by Dustin, on Flickr
I'm undecided if I truly like this look better than the previous. I do enjoy the smooth ride though. I have some plans for July/August when someone releases a new bumper for this body style, I think the black wheels and look in general will flow much better then.
IMG_5051 by Dustin, on Flickr
I'm undecided if I truly like this look better than the previous. I do enjoy the smooth ride though. I have some plans for July/August when someone releases a new bumper for this body style, I think the black wheels and look in general will flow much better then.
#38
Lift,lower,stock,wrecked
Thread Starter
Thanks.
20x10 -12mm.
I'm really liking the look and ride better.
Putting it to work
20150606_103606 by Dustin, on Flickr
20x10 -12mm.
I'm really liking the look and ride better.
Putting it to work
20150606_103606 by Dustin, on Flickr
Last edited by texasbred; 06-06-2015 at 03:34 PM.