2013 STX Reg Cab 5.0
#12
Senior Member
Thread Starter
So I've been considering tow mirrors since i reallyy don't like my lack of visibility in my plain jane stx mirrors any thoughts? anyone use the 1a auto ones or should i get ford.
#13
Senior Member
I'm throwing around the idea of tow mirrors myself, I was pulling a 24 foot trailer the other day with a New Holland "Boomer" sized tractor on it. Even after adjusting them, it was a bit odd to pull and back into place. The led behind your grille is awesome man! Care to provide some closeup's of how the mount secures to the rubber bumpstops?
#14
Senior Member
Thread Starter
I'm throwing around the idea of tow mirrors myself, I was pulling a 24 foot trailer the other day with a New Holland "Boomer" sized tractor on it. Even after adjusting them, it was a bit odd to pull and back into place. The led behind your grille is awesome man! Care to provide some closeup's of how the mount secures to the rubber bumpstops?
#15
Senior Member
I have a video on youtube of the install just search f150leds.com review it should vome up youll see the blue but its really simple theres a torx screw holding the bump stops on you just unscrew that slide in the hole on the bracket and screw it back into the bump stop easy as pie but ill grab a pic in the morning
#17
Senior Member
Thread Starter
Raptor tails just shipped should have them next week and otrattw switch panel and switch comming in tuesday gonne mount it in the cubby hole next to driver side the dimensions are almost perfect so hopefully will just slide right in , making my own little wire harness for the switchs independant leds to light up with the dash lights will post pics of it when done
#18
Senior Member
Thread Starter
Raptor tails just shipped should have them next week and otrattw switch panel and switch comming in tuesday gonne mount it in the cubby hole next to driver side the dimensions are almost perfect so hopefully will just slide right in , making my own little wire harness for the switchs independant leds to light up with the dash lights will post pics of it when done
#19
Senior Member
Raptor tails just shipped should have them next week and otrattw switch panel and switch comming in tuesday gonne mount it in the cubby hole next to driver side the dimensions are almost perfect so hopefully will just slide right in , making my own little wire harness for the switchs independant leds to light up with the dash lights will post pics of it when done
#20
Senior Member
Thread Starter
One homemade wire harness
This will be used from the dash light wire on the dimmer switch to my 3 switch panel 2 will be unconnected untill i have switches to put there wasnt hard just some 16g primary wire a few butt connectors disconnects and some flex gaurd tubing and voila factory style harness
This will be used from the dash light wire on the dimmer switch to my 3 switch panel 2 will be unconnected untill i have switches to put there wasnt hard just some 16g primary wire a few butt connectors disconnects and some flex gaurd tubing and voila factory style harness