2013 Scab XL long bed build
06-10-2015, 11:23 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2015
Location: The Great State of Texas
Posts: 11
Received 0 Likes
on
0 Posts
2013 Scab XL long bed build
Hard to find a FX or Tremor in a single cab long bed so I decided to build my own. Will post pix as I go. First up, tow hooks and lower valance.
Gotta remove the bread loaves and tag frame to remove the lower valance
Slip the nuts into the frame horn
This tab is behind the the bread loaf and you need to pinch it behind the bumper to get it off intact.
Insert the rear bolt into the nut and you can hang the tow hook from it.
Insert the front bolt.
Insert the tabs on the new valance and re-attach the 12 8mm screws along the bumber.
Push the bread loaves back in place and you're done.
Gotta remove the bread loaves and tag frame to remove the lower valance
Slip the nuts into the frame horn
This tab is behind the the bread loaf and you need to pinch it behind the bumper to get it off intact.
Insert the rear bolt into the nut and you can hang the tow hook from it.
Insert the front bolt.
Insert the tabs on the new valance and re-attach the 12 8mm screws along the bumber.
Push the bread loaves back in place and you're done.
Last edited by Paul2990; 06-10-2015 at 11:43 PM.
06-17-2015, 10:08 PM
#3
Senior Member
sub'd....so far so good 