2013 Oxford FX4 'The Truck'
#12
Senior Member
Thread Starter
eBay Listing
The following users liked this post:
akmedic77 (11-06-2014)
#14
Senior Member
Thread Starter
Guess it's time for an update...
-BBK Throttle Body Installed, put silencer rings back in
-Rigid DOT/SAE Fogs Installed
-New Rigid 20" SR2 Hybrid/Driving Combo in place of 20" SR
-Blue Sea 12 Position Fuse Box installed, all wiring redone (2 times so far...on for the 3rd when I get time, hopefully the last......doggone CDO)
-Factory Fogs removed for Amber Dually Spots (going for JW Speakers next). I also don't have a picture. It's going to change anyway!
-Door Detent 3.0 by Northlight Labs installed
-Ford OEM HD flaps replaced old ones
-FX4 Decal removed
Everything installed before I moved the Amber Duallys out to the fog buckets. They are the ones that were in the center. I tried to use the Starkey Deutsch to H10 connectors, but for some reason they would not power the Ambers. Might be too little draw; the DOT/SAE ones worked, though!
Blue Sea box; now everything is double fused w/a 100 Amp Circuit Breaker.
Switches are now installed to the knee panel to the left of the steering column. More on this in a future post...
Here is what the DOT/SAE fogs look like. No other lights are on. These are the two outer lights in the lower portion of the brush guard.
-BBK Throttle Body Installed, put silencer rings back in
-Rigid DOT/SAE Fogs Installed
-New Rigid 20" SR2 Hybrid/Driving Combo in place of 20" SR
-Blue Sea 12 Position Fuse Box installed, all wiring redone (2 times so far...on for the 3rd when I get time, hopefully the last......doggone CDO)
-Factory Fogs removed for Amber Dually Spots (going for JW Speakers next). I also don't have a picture. It's going to change anyway!
-Door Detent 3.0 by Northlight Labs installed
-Ford OEM HD flaps replaced old ones
-FX4 Decal removed
Everything installed before I moved the Amber Duallys out to the fog buckets. They are the ones that were in the center. I tried to use the Starkey Deutsch to H10 connectors, but for some reason they would not power the Ambers. Might be too little draw; the DOT/SAE ones worked, though!
Blue Sea box; now everything is double fused w/a 100 Amp Circuit Breaker.
Switches are now installed to the knee panel to the left of the steering column. More on this in a future post...
Here is what the DOT/SAE fogs look like. No other lights are on. These are the two outer lights in the lower portion of the brush guard.
#16
Senior Member
Thread Starter
Thanks! Yeah, they do and I like them a lot. Soon I'll have four more 1/2" LED projectors from Super Bright LEDs attached under the bumper. Just have to figure out the mounting solution, as I don't want to drill any holes in the bumper.