2013 Lariat Baby Raptor Build Thread
#202
I finally got around to JB Welding the stupid plastic things back on to the autometer pillar pod trim. I got the gauge wired up and tubing into the engine bay but I still need to tie it in for the needle to start moving. I put a dimmer in so I'm not blinded at night, I zip tied it on so if I kick or hit it hopefully the small zip ties will break and no the dimmer part .
#204
Scott, I've really enjoyed your build. Bid you crack your 20" wheels as well or did you just want to change to 18" for a new look? How has your ecoboost handled the extra size and weight? I am looking at moving to 315/70/17 raptor wheels and tires soon.
Last edited by biscuit141; 02-29-2016 at 06:54 AM.
#205
Thank you. The two of the 20s needed to be replaced so I figured going to 18s would be a little smother. I'm sure they are but the coil overs got cranked up a little so what I gained in the 18s was lost with the more preload on the coil over. The 81 lb tires killed the mpgs so I'm thinking of going back down to a 33.5 and to about a 66 lb tire to bring them back up. depends on how things go I may pull the trigger on 34x12.5 ko2s this summer to bring he mpgs back up. The AT2s are predicable so they're not a bad tire, just a heavy tire.
The following users liked this post:
SS308 (05-12-2016)
#210
Senior Member
I appreciate sharing your experiences with the shocks and tires. I was debating going to 33's or 35's. I thinks I'm going to go with the 33's after reading your post.
Thanks...
Thanks...