2012 5.0 FX4 Build "Black Betty"
#12
Senior Member
Thread Starter
I believe there are some individuals on the forum that have welded there tow hooks onto the bullbar.
#13
Senior Member
Thread Starter
New wheels and tires on! Makes a big impact in my opinion. 20x9 Fuel Hostage wheels with +20 offset wrapped in 295/60r20 Nitto Trail Grappler MT's.
No rubbing on the control arm at full lock either direction. Had minor trimming on the plastic on the front and back side of the wheel housing. Kinda tight but have 1-2 fingers in between both sides. Already had the 2" procomp leveling kit.
No rubbing on the control arm at full lock either direction. Had minor trimming on the plastic on the front and back side of the wheel housing. Kinda tight but have 1-2 fingers in between both sides. Already had the 2" procomp leveling kit.
Last edited by jfcplayer17; 03-27-2012 at 06:04 PM.
#14
Senior Member
New wheels and tires on! Makes a big impact in my opinion. 20x9 Fuel Hostage wheels with +20 offset wrapped in 295/60r20 Nitto Trail Grappler MT's.
No rubbing on the control arm at full lock either direction. Had minor trimming on the plastic on the front and back side of the wheel housing. Kinda tight but have 1-2 fingers in between both sides. Already had the 2" procomp leveling kit.
No rubbing on the control arm at full lock either direction. Had minor trimming on the plastic on the front and back side of the wheel housing. Kinda tight but have 1-2 fingers in between both sides. Already had the 2" procomp leveling kit.
#15
Senior Member
Thread Starter
Yes sir. These are 295 and plenty of wheel for myself. I know a lot of people were running 305 and from reading it was more hit or miss on rubbing the control arm, dependent on offset and backspacing. However, I figured I would play it safe and go 295 and I am completely happy with them.
#16
Senior Member
Yes sir. These are 295 and plenty of wheel for myself. I know a lot of people were running 305 and from reading it was more hit or miss on rubbing the control arm, dependent on offset and backspacing. However, I figured I would play it safe and go 295 and I am completely happy with them.
#17
Senior Member
Thread Starter
#18
Senior Member
Thread Starter
Today I spontaneously decided to paint the side markers black. These were easily popped out with a small flat head screwdriver and the project was done in no time.
I used Krylon Fusion Flat Black spray paint. Picked it up from local Ace Hardware. It says sanding is not required but I chose to anyway. I finished it with 2 coats of clear coat.
Here are before and after pics
I used Krylon Fusion Flat Black spray paint. Picked it up from local Ace Hardware. It says sanding is not required but I chose to anyway. I finished it with 2 coats of clear coat.
Here are before and after pics
Last edited by jfcplayer17; 03-27-2012 at 03:20 PM.
#19
Senior Member
Thread Starter
Finally got my Westin 6" offroad lights on the bullbar. These are 55 watt lights with the dark covers. Here is a photo of the front end.
Here are before and after photos.
Here are before and after photos.
Last edited by jfcplayer17; 03-29-2012 at 07:32 PM.