2011 SuperCrew
10-19-2013, 11:33 PM
#1
Junior Member
Thread Starter
2011 SuperCrew
2011 F150 XLT SuperCrew 4x4 5.0. Bought it used in November 2012 due to my 2001's engine letting go while we were on vacation. It is a North Carolina Edition, which I hadn't seen or heard of before. Stock other than the Under Cover SE tonneau and the vent visors when I got it, I've started adding things so I thought I'd share.
It didn't come with floor mats so the first thing I did was order some Husky Liners with a diamond tread pattern. They kept it clean all winter and have saved a couple spills from the kids. My first Mod was a Flowmaster cat back exhaust kit because the sound was the thing I missed most about not having a V8 truck for many years. After that I picked up a used K&N CAI and a 2.5" level kit real cheap from a local guy returning his truck to stock. I have yet to install the level kit, but hope to do so soon. Next I ditched the stock side steps and when with N-Fab tube steps powder coated black. After that came the N-fab light bar and the KC's, 2 fog lights and 2 off road driving lights.
I added a cheap after market backup cam, but needed more light to see at night so I installed a flush mount Rigid LED light in the bumper to take care of that. Works great, its wired into the reverse lights so it comes on every time and I also wired in a second switch so I can use it even if the truck is in park or off, like for hitching up the trailer in the dark
It didn't come with floor mats so the first thing I did was order some Husky Liners with a diamond tread pattern. They kept it clean all winter and have saved a couple spills from the kids. My first Mod was a Flowmaster cat back exhaust kit because the sound was the thing I missed most about not having a V8 truck for many years. After that I picked up a used K&N CAI and a 2.5" level kit real cheap from a local guy returning his truck to stock. I have yet to install the level kit, but hope to do so soon. Next I ditched the stock side steps and when with N-Fab tube steps powder coated black. After that came the N-fab light bar and the KC's, 2 fog lights and 2 off road driving lights.
I added a cheap after market backup cam, but needed more light to see at night so I installed a flush mount Rigid LED light in the bumper to take care of that. Works great, its wired into the reverse lights so it comes on every time and I also wired in a second switch so I can use it even if the truck is in park or off, like for hitching up the trailer in the dark
Last edited by shuteme00; 10-19-2013 at 11:36 PM.
08-17-2014, 12:56 PM
#5
Junior Member
Thread Starter
Finally got more pictures to add to the build
Got the lift added, 2" spacer in front, block in rear. Played around with some plasti dip on the stock wheels to see how I would like the blacked out look.
Compared to a stock '09
Then new wheels & tires
295/70/17 Cooper Discoverer STT on XD Addict 17x9
Compared to a stock '09
Then new wheels & tires
295/70/17 Cooper Discoverer STT on XD Addict 17x9
Last edited by shuteme00; 08-17-2014 at 01:02 PM.