2011 FX4 to Raptor Conversion
#1
Senior Member
Thread Starter
2011 FX4 to Raptor Conversion
Finally finished up a raptor conversion on my 2011 FX4 Supercrew 6.5 FT bed. All front end body parts are Ford OEM. The bedsides are from Fiberwerx. The suspension is all Ford OEM with the exception of Fox 3.0 Factory Series shocks front and rear. I swapped in a front torsen diff with 4.10s and had my rear gears swapped to 4.10s. Using 2" spacers in the rear to match the front track width. Plan to upgrade leaf springs to Deavers and install bumpstops in the near future.
The following users liked this post:
Abraham5G (12-16-2015)
The following users liked this post:
klumb15 (12-13-2015)
The following users liked this post:
klumb15 (12-18-2015)
The following users liked this post:
klumb15 (12-18-2015)
#5
Senior Member
Looks great man! So you swapped to Raptor rear axle or were the 2" spacers all that was necessary to make the wheels sit flush with the bedsides?
Last edited by Abraham5G; 12-16-2015 at 07:18 PM.
The following users liked this post:
klumb15 (12-18-2015)
#6
Senior Member
Thread Starter
#7
Wow nice work. Looks awesome.
The following users liked this post:
klumb15 (12-18-2015)
Trending Topics
#10
Senior Member