2011 6.2 F150 Lariat Build- UG Platinum White
#1
Junior Member
Thread Starter
2011 6.2 F150 Lariat Build- UG Platinum White
Really enjoy this forum so instead of cyber stocking I finally decided to add some content.. Everything Ive done myself Has came from information from this site.
Here's my build so far.. Due to time its taken me quite a while to get to this point. Hope you Enjoy
Here's my build so far.. Due to time its taken me quite a while to get to this point. Hope you Enjoy
#4
You going to throw some on some 37s?
#7
Junior Member
Thread Starter
The Aerosol/Rattle can paint from Automotivetouchup.com was a better match IMO than the traditionally applied automotive paints..
Ive come to realize that the Tri Coat UG white is hard to match.. The base coat, not so much its the 2nd Base or the Pearl if you will.. You have to "walk it in" with the pearl...Happy how these came out though...
Ive come to realize that the Tri Coat UG white is hard to match.. The base coat, not so much its the 2nd Base or the Pearl if you will.. You have to "walk it in" with the pearl...Happy how these came out though...
Last edited by Nicholas.Colclough; 05-13-2014 at 12:32 AM.
Trending Topics
#9
Junior Member
Thread Starter
U-Pol Raptor Liner.. Pretty straight forward project.. took about 6 hours 5 1/2 of which was "prep" sanding and so on.. I hightly suggest.. However.. I bout the "kit" which came with 3 bottles.. I only used 2 on the bed, I used another bottle for my Tool Box.. so I have one left over.. I may use it to retouch up some spots... I did buy the undercoating gun it was like 30 bucks... Ill defiantly re use it.. to spray my trailers.
Last edited by Nicholas.Colclough; 05-13-2014 at 12:45 AM.
#10
Junior Member
Thread Starter