2001 Lariat Build
#1
Junior Member
Thread Starter
2001 Lariat Build
This Is my 2nd 2001 Ford but a 4 door lariat 4.6L Triton this time. I am currently upgrading and fixing my new baby up. I am kinda modeling it after a build I seen on here called (Project kaedence). I currently have changed out the stock rims and tires with aftermarket ones put a new sound system in and a new grill. Tomorrow I am going to Herculiner the whole bottom of the truck doors, bed and possibly the front/rear bumpers as well as order fender flares.
In the next few weeks I will be replacing the head and tail lights with aftermarket ones, Replacing the stock steps with Nerf bars and adding Flowmaster Super 44 Exaust system to her.
Ideally I want the Truck lifted with at least 35`s but that is not in the budget at this time. Any advice, Pictures and or ideas from y`all would be greatly appreciated.
Stock
In the next few weeks I will be replacing the head and tail lights with aftermarket ones, Replacing the stock steps with Nerf bars and adding Flowmaster Super 44 Exaust system to her.
Ideally I want the Truck lifted with at least 35`s but that is not in the budget at this time. Any advice, Pictures and or ideas from y`all would be greatly appreciated.
Stock
#3
Junior Member
Thread Starter
Herculiner Project
Finished product.
Side View
What do y`all think??
This is the Herculiner Project I am working on today. I have the 1st coat on and am wateing for it to dry.
Finished Sanding and taping off the sides
First coat on just waiting for it to dry to put on the 2nd.
Last edited by Rebel1CSA; 08-28-2015 at 04:20 PM.
The following users liked this post:
Rebel1CSA (08-28-2015)
#5
Junior Member
Thread Starter
Lights
I put in the front lights today next is the Nerf bars. I will ordering the taillights as soon as I decide which ones I like more (carbon fiber or matte black).
#6
Junior Member
Thread Starter
Tail Lights
I put the tail lights on today and Removed the stock side steps. The Nerf bars should arrive Tuesday. On a side note if anyone is going to remove the stock side steps from a Lariat take your time the rusted bolts made it almost impossible to remove with out cutting thankfully I went over to a buddy`s house that had the right tools and removed the 2nd one with little problems but took over 2 hours.
New Taillights and stock steps removed.
She does have a nice rear end!!
New Taillights and stock steps removed.
She does have a nice rear end!!
#7
Junior Member
Thread Starter
Tail Lights
I put in the til lights the other day and removed the stock sidesteps. Quick Note The stock sidesteps (If rusted) are near impossible to remove without prying and some cutting. Next up is the Nerf Bars.