tireur

Thanks for the precision!

shortride

iTrader: (1)

I don't understand the inner and outer puddle lamps. I thought there were only the one puddle lamp on the lower part of each mirror.

Bob_Mac

There is only one puddle per mirror. Can you please elaborate why you think there is 2?

Bob

Bob_Mac

I have just installed the puddle lamps on my 2011 XLT and the violet wire is the same for this model year.

Commander316

on my 11 FX2 you connect one to a blue with green stripe and ground the other.. i'm not doing puddle lights so i dont have three wires

Night_Wolf

My local Walmart doesn't carry the 18" lights to cut in half but they do carry a 24" set of LED's. When I cut the required 9"s can the other half still be used or are they garbage

pickupman2007

Ops. wrong thread, sorry.

Thanks for the info. Did mine yesterday. I used 6 LED strips as they seemed to fit better, 9 just seemed to be an awful close fit. Also wired though the puddle lamp hole so I didn't have to take the mirror apart.

idb2

I just ordered the blinkers, will do this as soon as they come in. OP, are you still active? I would like to be able to ask some questions as I am installing them.

Brucem609

Gentlemen, I hav a 2010 STX. Are the lights to hook up the lamps in the mirror? i have had 2 dealers tell me differnt things. Before I buy the lamps I need to know.

21RRF150

iTrader: (1)

I can answer you man...I have a 2010 STX as well. And no, the wiring is not in your existing mirrors. I bought a pair with blinkers and heat off of another member of this site. They were plug and play though. Except for heat. You'd need a new climate control as well.