How-To: Big 3 Upgrade
#21
if anyone doing this mod could pictures to go along with this thread (awesome write up btw, looks like u put a lot of time into it) it would be a wonderful help!
or if theres another thread on this somewhere else, any info is helpful thanks!
or if theres another thread on this somewhere else, any info is helpful thanks!
#23
Sorry for the delay guys. I've been inactive for a while. I'll go out tomorrow and take pics of what I have now. While it won't be as in-depth as the first set of pictures, but they should help out enough to allow one to get the job done.
Last edited by mblouir; 07-20-2010 at 01:04 AM.
#25
No problem. Like I said it won't be as in-depth. The only crucial thing missing, though, is the prep work. Stuff like cutting the cable to length, proper crimping/soldering, etc. Not rocket science, but it's good to see how that stuff is done.
It's been a while since I made the thread, so I am unable to edit the first few posts. I'll post them up when I get them edited and get a moderator to add a message and link to the post that contains the pictures.
It's been a while since I made the thread, so I am unable to edit the first few posts. I'll post them up when I get them edited and get a moderator to add a message and link to the post that contains the pictures.
#27
Okay guys here are the updated pics. I've messaged Jon to add a message from me into the first post so that anyone that opens the thread sees it first and can easily find this post. Let me know if you have any questions. Hope this helps some of you out. The pictures should be self-explanatory when it comes to cable locations, but let me know if you have any questions. I'll repeat what I said in the original post: this isn't a set-in-stone way....it's the way I did it.
#30
BAMF Club
The new pics worked out great, but I'm having trouble figuring out where you put the wire for the Engine block to Ground on the engine...