Originally Posted by 13f150plat
just went out side to do it as well .. time being used zip ties.. til i can get a nice coated wire and some key rings... and drill out the latches to attach to ..
but yea.. i was wondering myself how do i get back there..
as an emt i could store some gear back there.. ked... small medbag... i like it
Oddly enough the coated wire I'm using is picture hanger wire. Got it at Walmart for about $2. The Ferrules and Stops and key rings I got at Lowe's they were about $4 for everything.
As for getting to the latches. Fold the seat up, then reach behind the seat from the opposite side and pull up on the latch. So, for example if you are doing the "40" (passenger) side you'd need to be in the truck on the "60" (driver) side. You have to reach over the seat so that you can actually grasp the pin. You can do it from outside the truck but you have to contort your arm in such a manner that it is very uncomfortable to grasp the pin.
, thanks. I honestly think this is the first project I've ever done where I didn't have to buy double the material due to screw ups.