Mrocha85

Sorry for the delay. Here's a few pics.

FLiPinoy916

where would be looking to tap into? Im in the same boat as FYABOY with just having the cap and no factory wiring. Anyone taken a stab at this?

FLiPinoy916

Just got my parts from Tasca and started the process. Looking to get the wiring done within the next week.

Limited F150

http://www.daytimebrightlites.com/Pu...ghts_NL3C.html

anyone use these? says they fit f150s.

devildog234

im gonna look into doing this. im thinking maybe the interior lights that way everytime you hit the unlock button or open a door they would turn on. that is if no one has any other suggestions.

FLiPinoy916

I was able to tap into the purple wire which also turns on the dome light. It's fades out after a few moments when the door is locked and stays on when unlocked. It also activates when I open my door. I tapped into the same negative wire as the turn signal side marker

tx_fx2

I'm curious about those as well. Their installation looks like a breeze and pretty quick as it replaces the entire puddle light, not just a bulb.

Henry J

Yes, I have and they are great - 5 minute install.

chad34

f150leds.com sells these for $20 of you don't want the work.did mine myself but time is money so check them out.They offer a lot of other pre wired led upgrades too.Bed lights interior,etc.Doing it yourself is always better.Imo

nrceptr

iTrader: (1)

I converted to powerfolds on my 14 XLT and did the daytime brightlites LED upgrades. I got the LED interior lights from them also.