Youngone2012

iTrader: (1)

Anyone running water meth on a s/c 5.0 if so how is it working for you, how much timing are u running? Also what kit do u guys have? I ordered a 20011 from snow performance and i guess I'll be tapping the nozzle into the rubber boot between the maf and the throttle body..

Youngone2012

iTrader: (1)

Bump

mechanicboy

How about how did you wire it, even on an eco?

07bluelbz

Man I wish I could help you guys. Are you trying to hook it up to be boost activated?

mechanicboy

His controller is for MAF sensor hookup. I'm beginning to think he will need to go boost activation. Two tuners on the SVT forum say don't hook up to the MAF sensor but don't say why.

Youngone2012

iTrader: (1)

Boost activated won't work, as the boost is instantaneous on positive displacement blowers, it reads off maf so that it can progressively add the meth, with a boost controller it will just spray the heck out of it immediately, once it sees all the boost !!! Lol

07bluelbz

Good Point lol. I was also going to suggest looking on the mustang forums for advice but it sounds like you have already done that.

mechanicboy

Yea we already have. The tuners say don't touch the MAF wires but don't recommend an alternative or members say you must modulate on a PD blower.

07bluelbz

This article from Snow says they tapped into the injector wires.


http://www.snowperformance.net/produ...le-pdf-126.pdf

Youngone2012

iTrader: (1)

That is for the stage 3 water/meth kit for the mustang ... I have the stage 2 with a maf u controller ( I'm told the maf controller can read any maf sensor signals) the maf frequencies on the product are all way higher than that of the readings in my data log ...