Turbo Coolant line leak
#11
#12
That is the bad one to get to . I just pulled my turbo today and replaced the manifold and gasket. And honestly, it would probably be easier to pull the turbo than to try and pull that line from behind it... That fitting is like $4. It has an o-ring inside of it like stated above. I am glad I replaced all of mine while I had it all apart.
#13
Senior Member
Is the noise a squeal or chirping sound? If so, see https://www.f150forum.com/f70/resolu...-noise-277320/
#14
Did you visit the thread I linked? Sounds exactly like the issue I had. Any chance you could video it?
#15
Senior Member
<<<@!2!@>>>
Took me a couple of tries to capture the noise. It's pretty faint in the video, but that's due to the phone. It's not a typical turbo sound, more of a chitter. Not what I'd expect for an exhaust leak.
Thoughts?
Took me a couple of tries to capture the noise. It's pretty faint in the video, but that's due to the phone. It's not a typical turbo sound, more of a chitter. Not what I'd expect for an exhaust leak.
Last edited by Cord; 10-28-2014 at 02:42 PM.
#16
<<<@!2!@>>>
Took me a couple of tries to capture the noise. It's pretty faint in the video, but that's due to the phone. It's not a typical turbo sound, more of a chitter. Not what I'd expect for an exhaust leak. Ecoboost turbo - YouTube Thoughts?
Took me a couple of tries to capture the noise. It's pretty faint in the video, but that's due to the phone. It's not a typical turbo sound, more of a chitter. Not what I'd expect for an exhaust leak. Ecoboost turbo - YouTube Thoughts?
http://s179.photobucket.com/user/mys...f6a2c.mp4.html
#18
The manifolds are surprisingly cheap from ford. I think I had $100 in my whole job... You will need the manifold, gasket, turbo flange gasket, and i would go ahead and replace the coolant fittings too.
The following users liked this post:
Cord (10-28-2014)
#20
I can't get my coolant line clip in .
I too had the exhuast leak and am in the middle of putting the turbo coolant lines back in. I can't get it to seat properly. I'm using the original clips that came on it.