Trouble Codes for 2012 Ecoboost
#1
Resident Piņata
Thread Starter
Trouble Codes for 2012 Ecoboost
Does anyone have, or know a source for engine diagnostic codes for a 2012 3.5L Ecoboost?
Mine threw a #111 code likely due to a tuner and changing elevation. I got rid of the code and it likely won't come back, but I'd like to know what the codes mean in greater detail. The #111 code has to do with air intake I believe, likely the MAP sensor.
Thanx in advance for any help!
Mine threw a #111 code likely due to a tuner and changing elevation. I got rid of the code and it likely won't come back, but I'd like to know what the codes mean in greater detail. The #111 code has to do with air intake I believe, likely the MAP sensor.
Thanx in advance for any help!
#2
Boost :)
OBD Codes are not necessarily car specific. You can also just search on Google for the error code. All errors start with a letter P and are 4 digits, so yours would be P0111.
http://www.obd-codes.com/p0111
http://www.obd-codes.com/p0111
#3
F150Forum Sponsor - SCT Dealer! 614 620-5050
iTrader: (9)
OBD II Fault Code
OBD II P0111
Fault Code Definition
The Intake Air Temperature Sensor converts the air temperature into a voltage that is high when the Intake Air is cold and low as the engine warms up. Code P0111 is triggered when there is problem in the signal range from the Intake Air Temperature Sensor to the Powertrain Control Module.
Symptoms
Check Engine Light will illuminate
In many cases, no abnormal symptoms may be noticed
In some cases, the engine may be hard starting and/or get poor fuel economy
Common Problems That Trigger the P0111 Code
Defective Intake Air Temperature Sensor
Dirty air filter
Defective Mass Air Flow Sensor
Faulty or corroded Intake Air Temperature wiring or connections
Common Misdiagnoses
Intake Air Temperature Sensor is replaced when the real cause is a dirty air filter
Intake Air Temperature Sensor is replaced when the real cause is a poor connection or chafed wiring
Intake Air Temperature Sensor is replaced when the real problem is in the Mass Air Flow Sensor
OBD II P0111
Fault Code Definition
The Intake Air Temperature Sensor converts the air temperature into a voltage that is high when the Intake Air is cold and low as the engine warms up. Code P0111 is triggered when there is problem in the signal range from the Intake Air Temperature Sensor to the Powertrain Control Module.
Symptoms
Check Engine Light will illuminate
In many cases, no abnormal symptoms may be noticed
In some cases, the engine may be hard starting and/or get poor fuel economy
Common Problems That Trigger the P0111 Code
Defective Intake Air Temperature Sensor
Dirty air filter
Defective Mass Air Flow Sensor
Faulty or corroded Intake Air Temperature wiring or connections
Common Misdiagnoses
Intake Air Temperature Sensor is replaced when the real cause is a dirty air filter
Intake Air Temperature Sensor is replaced when the real cause is a poor connection or chafed wiring
Intake Air Temperature Sensor is replaced when the real problem is in the Mass Air Flow Sensor