Torque app. reading needed from a good ecoboost
#11
#13
Member
Thread Starter
What is your MPG, from what I know, -10 LFTF at idle is not supposed to be right (this is what the dealer told me).
Yesterday I disconnect all 4 O2 sensors, and all those value stay the same and no check engine light come on even if I have 4 pendant code when reading fault code. The truck was performing as good as with sensors connected.
Yesterday I disconnect all 4 O2 sensors, and all those value stay the same and no check engine light come on even if I have 4 pendant code when reading fault code. The truck was performing as good as with sensors connected.
#14
Senior Member
overall average is 16.5(corrected), thats with a lot of 70+, offroading, etc but if i drive nicely i can achieve 18+, my commute to work this morning was 19 (18 if i consider the computer is almost 1 mpg off), 68ish and some stop/go traffic.
#15
Senior Member
https://docs.google.com/file/d/0B2J3...it?usp=sharing
here is an excel output of the values from torque, i forgot to add a few, i may retry this in a bit with some more values.
here is an excel output of the values from torque, i forgot to add a few, i may retry this in a bit with some more values.
The following users liked this post:
pasprobe (02-21-2013)
#16
Member
Thread Starter
https://docs.google.com/file/d/0B2J3...it?usp=sharing
here is an excel output of the values from torque, i forgot to add a few, i may retry this in a bit with some more values.
here is an excel output of the values from torque, i forgot to add a few, i may retry this in a bit with some more values.
You have average AF ratio of 14.5 during your trip, so the truck run a bit rich. I got a average of 14 during a hour trip, but the computer never correct it.