Torque App and O2 sensor Question
#1
Senior Member
Thread Starter
Torque App and O2 sensor Question
I hooked up my Torque App yesturday and was playing around with it.
I checked for Codes. No Codes.
I saw a program you could run Call "Test Results". When I ran that it gave me a list of stuff it monitors. All were green with check marks except for one. It was red with an X. This is what it said.
MID: $Oc TID:$56
O2 Bank 3 Sensor 4
Min: 2,672.1 Max: 0
Current: 2,892.8
Should I be concerned?
Where is O2 Bank 3 Sensor 4? I tried to look it up with no luck?
Could someone with this app see if it comes up on yours?
I have a 2011 FX4 SuperCrew Ecoboost.
Thanks
I checked for Codes. No Codes.
I saw a program you could run Call "Test Results". When I ran that it gave me a list of stuff it monitors. All were green with check marks except for one. It was red with an X. This is what it said.
MID: $Oc TID:$56
O2 Bank 3 Sensor 4
Min: 2,672.1 Max: 0
Current: 2,892.8
Should I be concerned?
Where is O2 Bank 3 Sensor 4? I tried to look it up with no luck?
Could someone with this app see if it comes up on yours?
I have a 2011 FX4 SuperCrew Ecoboost.
Thanks
#2
Boost :)
I just checked mine and don't have that showing as an error. All the test results on mine come back ok, but I don't see the one you list on mine.
You should only have Bank 1 Sensor 1, Bank 1 Sensor 2, Back 2 Sensor 1, and Bank 2 Sensor 2. That will account for all four sensors.
Did you set up your profile correctly for the truck and list as many specifics in those parameters as possible? Just a thought.
You should only have Bank 1 Sensor 1, Bank 1 Sensor 2, Back 2 Sensor 1, and Bank 2 Sensor 2. That will account for all four sensors.
Did you set up your profile correctly for the truck and list as many specifics in those parameters as possible? Just a thought.
#4
Boost :)
More than likely I would guess it's an error on the part of the software but I don't know for sure. Is there a way to reset all those tests and have it start over? I know if you disconnect the battery it will reset all those tests and start over, but I wasn't sure if you can force it to just recheck it all through the app or not.
#6
I don't have the truck with me so I can't go check. However I was able to review my saved Mode $06 test results. Only 1 out of 12 even had this test listed. On the one that did have it listed the result was failed.
MID:$0c TID:$56
- O2 Bank 3 Sensor 4
Max: 147 Min: 10,337
Test result value: 0
FAIL
This is on a 2011 F150 Lariat SuperCrew Ecoboost.
- O2 Bank 3 Sensor 4
Max: 147 Min: 10,337
Test result value: 0
FAIL
#7
I don't have the truck with me so I can't go check. However I was able to review my saved Mode $06 test results. Only 1 out of 12 even had this test listed. On the one that did have it listed the result was failed.
MID:$0c TID:$56
- O2 Bank 3 Sensor 4
Max: 147 Min: 10,337
Test result value: 0
FAIL
This is on a 2011 F150 Lariat SuperCrew Ecoboost.- O2 Bank 3 Sensor 4
Max: 147 Min: 10,337
Test result value: 0
FAIL