For those wanting a cheap cat back....
11-26-2012, 01:24 PM
#1
Senior Member
Thread Starter
For those wanting a cheap cat back....
http://stores.jdautoandtruck.com/-st....bok?category=
Finally, an exhaust system I can rationalize paying for. Exactly what I've been wanting. Guess what I'm buying myself for christmas?
Finally, an exhaust system I can rationalize paying for. Exactly what I've been wanting. Guess what I'm buying myself for christmas?
11-26-2012, 01:37 PM
#2
Senior Member
http://stores.jdautoandtruck.com/-st....bok?category=
Finally, an exhaust system I can rationalize paying for. Exactly what I've been wanting. Guess what I'm buying myself for christmas?
Finally, an exhaust system I can rationalize paying for. Exactly what I've been wanting. Guess what I'm buying myself for christmas?
11-26-2012, 03:43 PM
#4
Senior Member
I'm here at work and the site is blocked, what type of exhaust is it?
11-26-2012, 03:56 PM
#5
The muffler is less than $100 and an exhaust shop will weld a piece of 3" to replace the resonator for $60ish. So basically the same system for $160. If youre just wanting a 3" system the buy any muffler and have a shop install it. It will sound and perform the same as the one you posted.
11-26-2012, 04:02 PM
#6
Senior Member
Anything but quality stainless will be gone in a few years up here.
I'd do as someone mentioned and get a SS muffler and have a SS piece welded in to replace resonator and still have all stainless.
I'd do as someone mentioned and get a SS muffler and have a SS piece welded in to replace resonator and still have all stainless.
11-26-2012, 04:22 PM
#7
Senior Member
Thread Starter
The muffler is less than $100 and an exhaust shop will weld a piece of 3" to replace the resonator for $60ish. So basically the same system for $160. If youre just wanting a 3" system the buy any muffler and have a shop install it. It will sound and perform the same as the one you posted.
Trending Topics
11-27-2012, 12:41 AM
#8
Official Member: Vast RWC
the stock system is not 3"............. what are you guys talking about? Welding in a muffler is NOT the same as this kit.
If the MBRP system were stainless vs alumized id be in................. i think 4" is way overkill but the price of the diamond eye has my interest because its stainless.
Id prefer 3" though.
If the MBRP system were stainless vs alumized id be in................. i think 4" is way overkill but the price of the diamond eye has my interest because its stainless.
Id prefer 3" though.
11-27-2012, 02:59 AM
#9
better looking than geno
Originally Posted by gimmie11s
the stock system is not 3"............. what are you guys talking about? Welding in a muffler is NOT the same as this kit.
If the MBRP system were stainless vs alumized id be in................. i think 4" is way overkill but the price of the diamond eye has my interest because its stainless.
Id prefer 3" though.
If the MBRP system were stainless vs alumized id be in................. i think 4" is way overkill but the price of the diamond eye has my interest because its stainless.
Id prefer 3" though.
