SCT livewire ts install
#11
Nice clean mount, I run my cable up into the A-pillar and out of the edge by the window, the to the sct which is window mounted, can only see about 6" of the cable, rest is all zip-tied under the dash.
#13
#14
#17
F150Forum Sponsor - SCT Dealer! 614 620-5050
iTrader: (9)
I had one of those but sent it back as SCT needs to tweak their design a bit. The mount worked great but since it's a fixed position, the Livewire cord to connect had to be bent at such an angle, it broke the pins within a day of having it installed.
I took a bunch of pics of it and sent it to SCT who is supposed to be revisiting the design a bit but haven't heard back yet on it. If it could swivel even just half an inch, it would work perfect but as is, puts too much pressure on the plug in.
I took a bunch of pics of it and sent it to SCT who is supposed to be revisiting the design a bit but haven't heard back yet on it. If it could swivel even just half an inch, it would work perfect but as is, puts too much pressure on the plug in.
#18
Senior Member
I had one of those but sent it back as SCT needs to tweak their design a bit. The mount worked great but since it's a fixed position, the Livewire cord to connect had to be bent at such an angle, it broke the pins within a day of having it installed.
I took a bunch of pics of it and sent it to SCT who is supposed to be revisiting the design a bit but haven't heard back yet on it. If it could swivel even just half an inch, it would work perfect but as is, puts too much pressure on the plug in.
I took a bunch of pics of it and sent it to SCT who is supposed to be revisiting the design a bit but haven't heard back yet on it. If it could swivel even just half an inch, it would work perfect but as is, puts too much pressure on the plug in.
#20
F150Forum Sponsor - SCT Dealer! 614 620-5050
iTrader: (9)
SCT never really came up with a better design, they just have the windshield mount. I ended up getting an Edge dash mount and modifying it to make the Livewire TS work so it looks factory clean now. :-)
In case, I actually have a used Edge mount pad that I just got from a used Livewire TS tuner that if you wanted, $20 shipped and it's yours. Would need new velcro to attach the tuner to it and double side tape to attach the Edge pod to the dash but should work just fine, its almost exactly like how I did my own dash mount. Assuming you have the later gen F150 11-14 that is.
How mine looks
In case, I actually have a used Edge mount pad that I just got from a used Livewire TS tuner that if you wanted, $20 shipped and it's yours. Would need new velcro to attach the tuner to it and double side tape to attach the Edge pod to the dash but should work just fine, its almost exactly like how I did my own dash mount. Assuming you have the later gen F150 11-14 that is.
How mine looks
Last edited by Franchi Motorsports; 12-02-2014 at 04:55 PM.
The following users liked this post:
BigBearLittleBear (06-26-2016)