How To Vent Your '13 Ecoboost BOV To Atmosphere (PICS)
#92
#93
Senior Member
FYI
I asked for samples. Sent to me for free.
I asked for samples. Sent to me for free.
The following users liked this post:
Ferriske (10-12-2013)
#96
X2 on the tial bov.
I've wanted a different/louder bov. Nothing too "ricer" but more noticeable.
I've wanted a different/louder bov. Nothing too "ricer" but more noticeable.
#97
This deff makes it louder and can hear it inside the truck a lot. It doesnt sound ricer, just air moving, no cheese ball sound. I like it but im a gear head, this isnt for the weak at heart old timers, lol.
#98
Senior Member
Thread Starter
I did. Was quite disappointed in the Tial Q valve as far as the sound. This little Ecoboost with these tiny turbos, just doesn't throw enough air around to make the Tial Q talk much. The Tial is a large BOV, and takes a lot of air to make it sound good. The Eco just doesn't have it. Even with my SSI tuner. It does sound good at times though.
#99
Does it require a lot of modification to use a tial bov?
If so what all would be required to do so?
If so what all would be required to do so?
#100
Senior Member
Thread Starter
On a stock I/C pipeing it would be a little difficult. Since all of it is plastic. It could be done though. Just put a piece of metal pipeing after the I/C, or buy some of those "upgraded" metal boost tubes, and weld on the flange for the Tial. Then run you a Vac/Boost reference line to the intake behind the throttle body. Unplug the factory BOV, and BAM you have a Tial.