Govenor
#3
The following 2 users liked this post by MAZZ MAN:
dieselhunter44 (12-09-2013),
ns_redneck (12-10-2013)
#6
Senior Member
Thread Starter
I'm not in the habit of doing this. I agree no need to go this fast.
It was very early in the morning on a deserted Interstate. No traffic in either direction, I could see a long way. From a 70 (speed limit) roll it took only a couple seconds to reach the limiter. After letting off traveled 4 miles before I saw another vehicle.
It was very early in the morning on a deserted Interstate. No traffic in either direction, I could see a long way. From a 70 (speed limit) roll it took only a couple seconds to reach the limiter. After letting off traveled 4 miles before I saw another vehicle.
Trending Topics
#8
Junior Member
Join Date: Jul 2013
Location: Binghamton, NY
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Is there a mph limit to what the stock drive shaft can handle? I had an 05 v6 mustang in high school and if you removed the speed limiter, there was a good chance you were going to explode the stock 2-piece drive shaft.
#9
Senior Member
Don't know if there is a limit but I can say it has stayed together so far, it will gear out at a certain speed.