Ecoboost condensate drain hole, post your results here
11-03-2016, 10:07 AM
#1991
I have a rubber mat in the garage. It's just if I park in drive or someone else's drive I don't want to leave a oil stain. I guess I will see how the rag works out and see if it drops much on it.
11-03-2016, 11:04 AM
#1992
It Diluted in a water mix dripping out and will not stay a stain forever. The oil an water cling with each other in the CAC when hot an cooling down from a combustion by product and water vapor ( in the air and from the crankcase + the oil vapors and condensate). Keep a bag of oil dry handy and broom it around as you like.
Last edited by papa tiger; 11-03-2016 at 11:10 AM.
11-03-2016, 06:53 PM
#1993
Senior Member
But under my truck has a nice oil coating from the hole to about two foot back
11-12-2016, 10:25 AM
#1995
King Hater
11-12-2016, 10:52 AM
#1996
It Diluted in a water mix dripping out and will not stay a stain forever. The oil an water cling with each other in the CAC when hot an cooling down from a combustion by product and water vapor ( in the air and from the crankcase + the oil vapors and condensate). Keep a bag of oil dry handy and broom it around as you like.
11-13-2016, 10:30 PM
#1997
the glug syndrome
Last edited by papa tiger; 11-13-2016 at 10:34 PM.
12-05-2016, 09:29 PM
#1998
Junior Member
Join Date: Dec 2016
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
3.5eco in a 11 Lincoln MKT
I'm looking to drill a hole in my inter cooler on my wife's 3.5 Eco. The videos I've found only show the f150. And the Lincoln forums I haven't been able to find any info. From what I'm looking at the IC is different than on the f150 can anyone help me with the location of the IC on a mkt and do you know if it's the same style?
12-05-2016, 10:00 PM
#1999
King Hater
No idea if its the same but its the same process. Find the low point in the intercooler and drill the hole.
12-10-2016, 12:17 PM
#2000
Senior Member
Can someone refer me to a YouTube link on drilling the hole? I searched YouTube but haven't found a good video on it. Is the hole drilled in the CAC itself or the tubing?