Ecoboost check engine light.
10-04-2012, 02:05 PM
#32
Junior Member
Join Date: Oct 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
been thru the the flashing codes,told no code reading,2nd time i pulled the code.dealer said needed converter. instead they put the ic cover on.also told me not to use fram filters,going on trip next weekend,will let you know if it is fixed.it is a 2012
10-29-2012, 08:17 AM
#33
Member
Join Date: Sep 2011
Location: Ohio
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
My truck did this same thing over the weekend. Was pulling a small trailer with a few dirtbikes and was accelerating on the on-ramp to get on the hwy. It downshifted 1-2 gears and then shuttered and went in to limp mode, CEL light was flashing. Couldn't accel and when I did try it would just shutter. I pulled over, turned off the truck and restarted and the light went away and the truck ran fine after.
Last edited by 95cobby; 10-29-2012 at 08:31 AM.
05-06-2014, 05:59 PM
#34
No updates?
I bought my '11 SCREW new and although I drive it nearly everyday, I don't have to drive far to work. I've only got 15k miles and today it went into limp mode. I pulled over and restarted it. Went about 1 mile and happened again. Pulled over and RS again drove about 1/2 mile and same thing. This time CEL came on and stayed on. All three times it happened while driving a steady 35'ish mph. 
Was hoping someone would post back on here and post what the fixed ended up being? Been nearly two years sine last post - still no fix?
Was hoping someone would post back on here and post what the fixed ended up being? Been nearly two years sine last post - still no fix?