Anyone have problems yet with 5.0 or Ecoboost
#1
Senior Member
Thread Starter
Anyone have problems yet with 5.0 or Ecoboost
I am wondering what problems are out there. Actual fixed problems not things like the speculated transmission problems. I am wondering what things are being identified on the 2011 models.
#4
Senior Member
Join Date: Mar 2011
Location: appalachian state university
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
there's always gonna be lemons, i think now that i recall pawpaw and one other guy is having some issues with their 5.0 on here, the only thing ive seen on here about the eco is some smoke issues.
The following users liked this post:
jaybusa1 (05-18-2013)
#6
I have an 11 xlt with 5.0. I did have a problem. I don't know if it was there when we bought it, or if it showed up later, but I did not notice it until after 1000 miles or so. I have a thread about it somewhere here, but don't think its in the 11 engines section.
It was a momentary engine tick that only showed up after a restart at normal operating temperature (never on a cold start). And it would only tick half a dozen times or so then go away.
Turned out to be a defective timing chain tensioner. Fixed under warranty-dealership did an EXCELLENT job (am I am very nitpicky about putting things back exactly how it came apart-down to every little wiring harness retainer, hose retainer, plastic fasteners, etc).
Have not had issue since. Over 6K on it now.
I searched all over the web when I had the problem before they knew what it was, but I couldn't find anything. I think my issue was a fluke-not common since I could not locate even ONE person with the same issue, but didn't they have tensioner problems on some of the older mod motors???
-Alan
It was a momentary engine tick that only showed up after a restart at normal operating temperature (never on a cold start). And it would only tick half a dozen times or so then go away.
Turned out to be a defective timing chain tensioner. Fixed under warranty-dealership did an EXCELLENT job (am I am very nitpicky about putting things back exactly how it came apart-down to every little wiring harness retainer, hose retainer, plastic fasteners, etc).
Have not had issue since. Over 6K on it now.
I searched all over the web when I had the problem before they knew what it was, but I couldn't find anything. I think my issue was a fluke-not common since I could not locate even ONE person with the same issue, but didn't they have tensioner problems on some of the older mod motors???
-Alan
Last edited by FirebirdTN; 04-21-2011 at 08:07 AM.
The following 3 users liked this post by Loki 5.0: