Topic Sponsor
2011+ Engine Related Questions Sub-Forum to the new engines that debuted in 2011.

2013 5.0 engine vibration HELP!

Thread Tools
 
Search this Thread
 
Old 07-31-2013, 10:56 AM
  #21  
Junior Member
 
naz1124's Avatar
 
Join Date: Jul 2013
Location: Dallas, Tx
Posts: 28
Received 2 Likes on 2 Posts

Default

Started the truck up this morning and I did not have the vibration issue. Before it would surely do it in the morning. Looks like the problem is fixed!
Old 07-31-2013, 11:19 AM
  #22  
One Bad MoFoMoCo Owner
 
sullyman's Avatar
 
Join Date: Jul 2012
Location: Texas Hill Country
Posts: 2,616
Received 394 Likes on 259 Posts

Default

Glad they found the fix for you. I have never had any issues, over 14,000 miles now, on my 2012.

This engine and transmission combination is smooth, at idle and in all driving conditions. If you are getting vibrations, it's not normal, whatever the dealer says.
Old 07-31-2013, 12:03 PM
  #23  
Senior Member
 
13Harleyfan's Avatar
 
Join Date: Aug 2012
Location: El Paso Texas
Posts: 1,616
Received 163 Likes on 132 Posts
Default

Originally Posted by naz1124
Well guys I have my truck back. The dealer says they found a loose air inlet hose on the throttle body. I didn't experience the vibration issue when I picked it up and it actually seems to be a lot smoother. I picked it up several hours after I was told it was ready. The true test will be when I start it in the morning but so far so good! The truck only has 900 miles on it and 5 when I bought it so it must have made it from the factory with the loose inlet hose.
I guess I'll finally have to open that hood and look around, sounds like a easy fix but mine feels like an ignition miss that is causing the rough idle in park. Naz, did your's feel like a misfire?
Old 07-31-2013, 12:09 PM
  #24  
Junior Member
 
naz1124's Avatar
 
Join Date: Jul 2013
Location: Dallas, Tx
Posts: 28
Received 2 Likes on 2 Posts

Default

It felt like maybe there was a spark plug out or something. That is what I originally thought the problem was.
Old 07-31-2013, 04:53 PM
  #25  
Junior Member
Thread Starter
 
Aevans's Avatar
 
Join Date: Jan 2013
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts

Default

13Harleyfan, Our thought to was a posible iginition problem, but nothing showed up when the computer was hooked up. There were times when the truck seemed as though it was just plain missing. We pulled all 8 plugs and they all seemed fine and then regapped each one. The truck ran a little smoother, but the vibration was still very noticeable. Glad your truck is running better naz1124. Let us know if you figure anything out 13harleyfan.
Old 08-02-2013, 02:19 PM
  #26  
Junior Member
 
naz1124's Avatar
 
Join Date: Jul 2013
Location: Dallas, Tx
Posts: 28
Received 2 Likes on 2 Posts

Default

just an update....its been 4 days and I'm still running smooth. I am confident that the issue is fixed now
Old 08-02-2013, 06:47 PM
  #27  
Platinum
 
TeamZambo's Avatar
 
Join Date: Jun 2012
Location: Oregon
Posts: 298
Received 44 Likes on 31 Posts

Default

Originally Posted by 13Harleyfan
I guess I'll finally have to open that hood and look around, sounds like a easy fix but mine feels like an ignition miss that is causing the rough idle in park. Naz, did your's feel like a misfire?

Mine does this exact thing, I think Ford may have set the idle RPM's too low, so I took my tuner and slowly raised the RPM's (don't remember how much but I know it was not much at all) after this my issue has gone away.
Old 08-03-2013, 09:53 AM
  #28  
Junior Member
 
tohigh4you's Avatar
 
Join Date: Jan 2011
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

Naz....any idea what hose they are referring to?? Mine has actually done this since I have owned the truck but it appears to have gotten much worse in last 5-6K miles....I guess I can go out here and start looking around for loose hoses.....
Old 08-03-2013, 10:07 AM
  #29  
Junior Member
 
naz1124's Avatar
 
Join Date: Jul 2013
Location: Dallas, Tx
Posts: 28
Received 2 Likes on 2 Posts

Default

I was just told it was an air inlet hose at the throttle body. That all it says on my paperwork also....sorry don't know the exact one or part number.
Old 09-09-2015, 06:10 PM
  #30  
Junior Member
 
jkbeegs's Avatar
 
Join Date: Sep 2015
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

I just became a member because my '13 F150 vibrates at around 50-55 mph especially if I am towing a light trailer with nothing in it. I bought it new and have 33,000 miles on it. Most of that is highway miles. I haven't read all of the posts but hope Aevans finds a answer. Only 3000 miles left on warranty.



Quick Reply: 2013 5.0 engine vibration HELP!



All times are GMT -4. The time now is 04:05 PM.