Wheel Offset Question
#1
Junior Member
Thread Starter
Wheel Offset Question
I'm looking to get some aftermarket wheels for my 2013 STX (4x2)
The stock wheels are 18x7.5 with a 45mm offset. Tires are 275/65R18. No lift or level.
I am looking at 3 sets of wheels, all 18x9 but with different offsets. One is -12, one is 0, and one is 35. I know the 35mm will fit, but I'm not sure about the 0 or -12. Will either of those fit with no modifications? If not, will a 2" leveling kit do the trick or will it need to be an actual lift? I can do a level, but I'd rather not spend the money on a lift for a 2wd truck.
Also, will my 275's fit an 18x9? I'm assuming they will, just wanted to double check.
Thanks in advance
The stock wheels are 18x7.5 with a 45mm offset. Tires are 275/65R18. No lift or level.
I am looking at 3 sets of wheels, all 18x9 but with different offsets. One is -12, one is 0, and one is 35. I know the 35mm will fit, but I'm not sure about the 0 or -12. Will either of those fit with no modifications? If not, will a 2" leveling kit do the trick or will it need to be an actual lift? I can do a level, but I'd rather not spend the money on a lift for a 2wd truck.
Also, will my 275's fit an 18x9? I'm assuming they will, just wanted to double check.
Thanks in advance
#2
Just went through this . 2011 xlt 4 by 4 . Stock 18s went with a 17 by 8 10 mm offset I believe . I leveled 2 in the front and have no rubbing . Went with a 285 70 17. I had 0 offset and they stuck out a **** load so went with the mayhem riots
The following users liked this post:
andywilson001 (02-18-2014)