What Settings are People running with their Edge Evolution?
09-08-2010, 06:55 PM
#1
I Like Tires
Thread Starter
What Settings are People running with their Edge Evolution?
Hey guys, I'm new to the forums.
I had a question though about the Edge Evolution Programmer. I just bought it and installed it on my truck and have been playing around with the settings in performance and tow. So I was wondering if some people could give me some reccomendations on what to set my tune at for towing, and performance when I feel like being on the throttle sometimes.
I have an 06 4x4 Supercrew 5.4L F150
For towing I pull an 14Lx8WX10H Enclosed motorcycle trailor, weighs about 4000-4500lbs I would estimate.
So the info I was wanting to get was for a normal Commuter drive, Performance, and Towing. Towing(w/ trailor) and Performance will always use 93 Octane or higher
Info that will remain constant is I have a 3.73 rear end and 2645mm circumference tires.
What I have done in Performance is:
WOT Shift: 1-2 5300, 2-3 5300, 3-4 5000
Rev Limit: 5450
Shift Firmness: 12
WOT Fuel: 1.8
Timing: +1.5
Any improvements on this are greatly appreciated!
Thank you for any info, and I also believe this thread will be of good reference for anyone else who has bought this product and wants some help on setting their tune!
I had a question though about the Edge Evolution Programmer. I just bought it and installed it on my truck and have been playing around with the settings in performance and tow. So I was wondering if some people could give me some reccomendations on what to set my tune at for towing, and performance when I feel like being on the throttle sometimes.
I have an 06 4x4 Supercrew 5.4L F150
For towing I pull an 14Lx8WX10H Enclosed motorcycle trailor, weighs about 4000-4500lbs I would estimate.
So the info I was wanting to get was for a normal Commuter drive, Performance, and Towing. Towing(w/ trailor) and Performance will always use 93 Octane or higher
Info that will remain constant is I have a 3.73 rear end and 2645mm circumference tires.
What I have done in Performance is:
WOT Shift: 1-2 5300, 2-3 5300, 3-4 5000
Rev Limit: 5450
Shift Firmness: 12
WOT Fuel: 1.8
Timing: +1.5
Any improvements on this are greatly appreciated!
Thank you for any info, and I also believe this thread will be of good reference for anyone else who has bought this product and wants some help on setting their tune!
06-24-2011, 08:02 AM
#3
Mark
iTrader: (1)
The Octane for level 3 is 91 or higher I believe and level 3 bumps your timing already...so don't know if you should bump it more...up to you...I use a lower Shift point for WOT...it seemed too high @ over 5K....also bumped the speed limiter to 120 MPH. You just gotta play with it till you hit the sweet spot.
06-24-2011, 09:01 AM
#4
I Like Tires
Thread Starter
Originally Posted by techrep
The Octane for level 3 is 91 or higher I believe and level 3 bumps your timing already...so don't know if you should bump it more...up to you...I use a lower Shift point for WOT...it seemed too high @ over 5K....also bumped the speed limiter to 120 MPH. You just gotta play with it till you hit the sweet spot.
Regarding the level 3 timing bump, it only bumps the timing if you do the canned tune itself. If u want to customize that canned tune then you have to bump the timing yourself.
06-24-2011, 11:24 AM
#6
2015 F-150 King Ranch 4x4
Still would like to see how other adjusted theirs and what other mods they have along with it...
POST THEM SETTINGS!
