Pyzon

Looking around to familiarize myself with the under dash area of my one day old CPO '11 XLT and noticed
this tangle of bare ended wires just above the accelerator. Seems like something was removed when this was traded in.....wonder if any of these are hot ?

Matt_RTR_FX4

That's where the flux capacitor wires in. Previous owner must of removed it.

BRONCO5150

Thats for you trailer brake

jpetrach

Dang it that's what I WAS GOING TO SAY

RLXXI

That is not Ford, it is aftermarket and who knows what it could have controlled. Tape the ends up just incase so it don't short out and blow fuses or worse, start a fire.

jpetrach

my 13 STX came with 2 wire harness that looked like that minus the ends. but looks like a brake controller wiring.

RLXXI

Precisely, you will never see bare connector ends like that from Ford. I refuse to speculate what it might be, I just know for a fact it's not oem.

Pyzon

[QUOTEThat's where the flux capacitor wires in][/QUOTE]

Don't need no flux capacitor, it an Ecoboost.....

I thought it was for a trailer brake too.

Gotta love the stealer CPO process......

Thanks for the replies.

taxgod4u

Don't need no flux capacitor, it an Ecoboost.....

[/QUOTE]



Incorrect, I was told by the service manager that Ecos require one for each turbo drive gear set, my dealer gave me twin flux converters at cost, only $1,500 for the pair. installed!! Sweeeet

jpetrach

Incorrect, I was told by the service manager that Ecos require one for each turbo drive gear set, my dealer gave me twin flux converters at cost, only $1,500 for the pair. installed!! Sweeeet[/QUOTE]



5.0ecoboost