Upper Control Arms
#1
Senior Member
Thread Starter
Upper Control Arms
Does anyone know the name(s) of companies that sell aftermarket UCA's the relocate or put the ball joint at a better angle for trucks with level kits or coil-overs?
#3
Senior Member
Thread Starter
Ok. I will look into those. Thank you.
Someone here on the forum had told me that if i just wanted 3-4 inches of lift, Coil-overs with UCA's would work.
Someone here on the forum had told me that if i just wanted 3-4 inches of lift, Coil-overs with UCA's would work.
#4
Junior Member
Join Date: May 2015
Location: Hawaii/Alaska...HiAk
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
check my info, but I'm fairly certain the consensus here is UCA's will only handle as much as 3" of lift from a coil over. Also my understanding is these aftermarket UCA's don't restore factory angles if your truck is leveled or slightly lifted, but do allow for greater range of motion. Beyond 3" you need a proper lift. There are some fairly comprehensive threads that would get into it. I just bought some Icons from stage3motorsports, they have a very helpful website and are usually quick to respond.